GE / IP FANUC Series 90/30 In Stock

Call Now

1-800-730-0292

sales@dosupply.com

1-919-205-4392

1756-HYD02

Rated 4/5 Based on 1 ratings.

Rate your purchase of the 1756-HYD02

Allen Bradley - ControlLogix - 1756-HYD02

Allen Bradley - ControlLogix - 1756-HYD02

SKU 2177232  UPC 0799705807143

DOsupply.com

Allen Bradley products are now sold by our affiliate company Dosupply.com.

Notice: By clicking this link, you will be redirected away from PDFsupply.com to DOsupply.com

Other Available Revisions for the 1756-HYD02 ABCDEFGHIJKLMNOPQRSTUVWXYZ

The 1756-HYD02 is manufactured by Allen-Bradley and it comes from the series of ControlLogix analog servo motors. The series features a wide range of both closed-loop and open-loop motion control for analog motion devices. It is designed to provide accurate positioning and control for hydraulic cylinders. This is a Hydraulic servo module is designed to work for low voltage applications. The device operates at 24 Volts DC and it has a power dissipation of 5.5 Watts. It has Proportional, Integral, and Differential Feed forward loop types with options for directional scaling. The module can control two axes. If needed, multiple modules can be used together to support up to 32 controlling axes. The 1756-HYD02 is a 36-pin module with 2 analog inputs and it also features a solid-state relay contact (isolated). The operator can wire the module to any linear displacement transducer to acquire feedback and control. The module monitors the position through the LDT transducer and an analog signal is generated to the actuators. The output is typically a velocity command represented by a ±10 Volts DC at 16 bits resolution.

RSLogix 5000 programming software is used to program and set the commands for the controller. Since this module can be used along with several other 1756-HYD02 modules, it should be ensured that all controllers are using the same software for programming. Additionally, the 1756-SYNCH module will be needed to synchronize motion sensors and actuators across multiple chassis. All ControlLogix Hydraulic Servo modules can be only mounted in ControlLogix chassis. There is a removable terminal block as well as the interface module to accommodate field side wirings. The module’s installation process is simple. The ControlLogix chassis should be already installed and grounded before introducing the module. Ensure that the module is electrostatically discharged, otherwise, it could cause performance deficiency as well as permanent damage. The 1756-HYD02 is recommended that the users should wear grounding wrist straps to avoid any shock. The pins or any circuit components should not be touched, especially when the module is working.

PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.

TOP