GE / IP FANUC Series 90/30 In Stock
Notice: By clicking this link, you will be redirected away from PDFsupply.com to DOsupply.com
The Allen Bradley 1771-FC is an output module fuse package that can be replaced. It is used with 16-point modules with the 1771-WH (non-fused) field wiring arm. The 1771-FC package comprises of 5 of each of the following fuse with the following rating; 2A 125V fuses; 2A (slow blow) 250 Volt fuses; 2A (normal blow) 250 Volt fuses; and 0.32A, 25V fuses. The fuses protect the circuitry of most output modules against overload with some having a single fuse to protect all the module’s circuits while others have individually fused circuits.
The 1771-WHF and 1771-WHFB optional wiring arms allow each output to be fused individually. Additionally, the 1771-WHF or the 1771-WHFB can be replaced with the 1771-WH which is also a wiring arm. The wiring arm provides for simple fuse replacement without the need to detach the wiring arm from the Input Output chassis. The 1771-FC output module fuse package, provides protection for output modules with a voltage rating of 48 Volts DC, 24 Volts DC, 240 Volts AC, 120 Volts AC and 24 Volts AC.
The 1771-FC also provides protection for the circuitry of the 8-point output modules against overload. Output modules protected with the 1771-FC should be operated within a non-condensing humidity of between 5 and 95 percent. The module has a storage temperature rating of between 40 and 85 degrees Celsius. Should be operated within a temperature of between 0 and 60 degrees Celsius. When wiring the 1771-FC use a 14 gauge with a 2 millimeters 2 maximum stranding or a 3/64 inch conductor with a maximum insulation of 1.2 millimeters. The wiring screw torque should not exceed 79 pounds on an inch.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.