GE / IP FANUC Series 90/30 In Stock

Call Now

1-800-730-0292

sales@dosupply.com

1-919-205-4392

1747-PIC

Rated 4.5/5 Based on 2 ratings.

Rate your purchase of the 1747-PIC

1747-PIC | Image

1747-PIC | Image 1747-PIC | Image

SKU 0  UPC 00

DOsupply.com

Allen Bradley products are now sold by our affiliate company Dosupply.com.

Notice: By clicking this link, you will be redirected away from PDFsupply.com to DOsupply.com

Other Available Revisions for the 1747-PIC ABCDEFGHIJKLMNOPQRSTUVWXYZ

The Allen-Bradley 1747-PIC falls under the SLC 500 family. This family has programmable memories. The 1747-PIC is not a programmable memory module itself, but it is an interface converter.  The 1747-PIC interface converter converts RS-232 interface to RS-485 interface. The DH-485 is like RS-485 except for that it can accommodate more network/electrical signals. The DH-485 is an Allen-Bradley born protocol. The 1747-PIC converts the interface when communicating with SLC 5/01, SLC, 5/02, and SLC 5/03 processors. Communication is from the computer or the programming software to the processor and the SLC controller. The 1747-PIC has an 11-inch long ribbon cable for connecting to the computer, plus a 1746-C10 cable for connecting to the SLC controller.

The 1747-PIC draws a maximum current of 0A at 5V and 5A at 24V. Additionally the interface converter has a maximum wattage of 2 Watts.  The 1747-PIC is compatible with COM1 and COM2 serial ports. Make sure to turn off the power management functions as this inhibit the PIC driver from functioning the best.  The 1747-PIC converts the RS-232 signals from the computer to RS-485 and communicates through the 1746-C10 cable to the SLC controller. When interfacing the 1747-PIC through the DH-485 port on the computer to follow the DH-485 protocol, set the DH-485 to be the program port. The BASIC development software has to be adjusted when using the DH-485 for communication protocol. This change is done via the configuration and terminal selection menus. The 1747-PIC interfaces the BASIC development software and the module. DF1 can be used to start communication with external devices that use either a radio link, a dial-up modem or a leased phone line.

PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.

TOP