1-919-535-3180 | 1-800-360-6802
sales@pdfsupply.com

GE / IP FANUC Series 90/30 In Stock

A Global Supplier of Industrial Electronics

1-919-535-3180

1-800-360-6802

Mon-Fri 8AM-5PM EST

sales@pdfsupply.com

1788-cnc

Rated 4.7/5 Based on 6 ratings.

Rate your purchase of the 1788-cnc

Image of 1788-cnc

Image of 1788-cnc

Preowned
Includes a PDF Electric and Supply warranty.

Other Available Revisions for the 1788-cnc 1788-cnc/A

Common misspellings:
  • l788-cnc
  • 17b8-cnc
  • 178b-cnc
  • 1788cnc

Technical Specifications for 1788-cnc

BrandAllen-Bradley / Rockwell Automation
Series1788 linking devices
Part Number1788-CNC
DescriptionControlNet Daughter Card
Operating Voltage5.0 Volts DC
Current Rating 450 milliamps
Power SourceClass 2/SELV Power Source
ConfigurationDIP Switches
ApplicationFlexLogix
Connector TypeV-pin Connector
Average Weight0.1 Kilograms
EnclosureOpen Type

The Allen-Bradley 1788-CNC Logix 5000 ControlNet Daughter Card is a communication card that has been designed for linking the Allen-Bradley PowerFlex 700S drives and the FlexLogix programmable controllers with DriveLogix controllers and other communication-enabled devices that are linked to the bus (EtherNet Network). This communication card belongs to the Allen-Bradley Logix 5000 Control system line. This communication card also provides the FlexLogix processor with the ability to monitor and control I/O modules that are remotely connected to the controller via the ControlNet network. The 1788-CNC Daughter Card offers versatile functionalities that include support for I/O bridge operation, high-speed data transfer via data tags, simultaneous communication with other bus nodes, direct local access via the Network Access Port (NAP), coaxial media module support, and the usage of 200-Micron-rated communication cable.

The Allen-Bradley 1788-CNC Daughter Card has a maximum backplane current draw of 450 milliamps at 5.0 Volts DC and total power dissipation rating of 2.3 Watts (7.68 BTU per hour). It comes in an open enclosure, and it offers a wide operating temperature range of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit). The 1788-CNC Daughter Card has a front-panel ControlNet connector that connects to a communication cable with a V-pin connector. When the 1788-CNC Daughter Card is used with the FlexLogix system, it provides the system with the ability to bridge messages from other networks such as the Ethernet, DeviceNet, and RS-232 serial networks. The 1788-CNC Daughter Card has multiple front-panel LED indicators that show both the module and network status. The 1788-CNC Daughter Card is designed for use within a 5 to 95% (non-condensing) relative humidity range. It weighs approximately 0.1 kilograms and it is C-TICK, CSA, and CE certified.

The Allen-Bradley 1788-CNC Logix 5000 ControlNet Daughter Card is a communication card designed for linking the Allen-Bradley PowerFlex 700S drives and the FlexLogix programmable controllers with DriveLogix controllers and other communication-enabled devices linked to the bus (the EtherNet Network). This module has a 5.0 Volt DC voltage requirement, 450 milliamps of maximum current draw at 5.0 Volts DC, and an open type enclosure.

F.A.Q for 1788-cnc

All online orders placed before 4:30 PM EST “SHIPS SAME DAY FREE!" World’s largest warehouse of Factory Sealed GE 90-30 PLC, GENIUS I/O and RX7i PACSystem.highlight_off

PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.