1-919-535-3180 | 1-800-360-6802
sales@pdfsupply.com

GE / IP FANUC Series 90/30 In Stock

A Global Supplier of Industrial Electronics

1-919-535-3180

1-800-360-6802

Mon-Fri 8AM-5PM EST

sales@pdfsupply.com

1762-IF2OF2

Rated 3.9/5 Based on 11 ratings.

Rate your purchase of the 1762-IF2OF2

Image of 1762-IF2OF2

Image of 1762-IF2OF2

Surplus New

$377

1 In Stock

3 Yr PDFsupply warranty

Refurbished

$196

27 In Stock

2 Yr PDFsupply warranty

Repair Service

$176

Fast Turnaround

2 Yr PDFSupply warranty

Order Today - Ships Today!

*US continental orders placed Monday-Friday before 4:30pm EST!

Other Available Revisions for the 1762-IF2OF2 1762-IF2OF2/A1762-IF2OF2/B

Common misspellings:
  • l762-IF2OF2
  • 1762-1F2OF2
  • 1762-lF2OF2
  • 1762-IF20F2
  • 1762IF2OF2

Technical Specifications for 1762-IF2OF2

Manufacturer: Rockwell Automation
Brand: Allen-Bradley
Product Description: MicroLogix Expansion I/O Module
Part Number: 1762-IF2OF2
Number of Inputs:Two (2), Differential
Analog Input Type: 0-10VDC; 4-20 mA
Analog Input Sensor Types: 2, 3, and 4-Wire Transmitters
Input Conversion Type: Successive Approximation
Input Accuracy: 55% full scale at -20É65 ¡C (-4 ¡FÉ149 ¡F) ±0.3% full scale at 25 ¡C (77 ¡F)
Number of Outputs:Two (2) Single-ended
Analog Output Type: 0-10VDC; 4-20 mA
Output Conversion Type:Resistor String
Output Accuracy:± 1.17% full scale @ -20É65 ¡C (-4 ¡FÉ149 ¡F) ±0.5% full scale @ 25 ¡C (77 ¡F)
I/O Data Type: Scaled for PID; Raw / Proportional
I/O Resolution: 12 Bit (Unipolar)
Compatible MicroLogix Series: MicroLogix 1100, 1200 and 1400
Mounting:DIN Rail /Panel Mount
Wire Size:#14 to #22 AWG (Solid) #16 to #22 AWG (Stranded)
Operating Temperature:0 to 55 C (32 to 131 F)
Storage Temperature:-40 to 85 C (-40 to 185 F)
Vibration:5g @ 10 to 500 Hz
Operating Shock:30 g
Dimensions90 mm (height) x 87 mm (depth) x 40 mm (width) height including mounting tabs is 110 mm 3.543 in. (height) x 3.425 in. (depth) x 1.575 in. (width) height including mounting tabs is 4.33 in.
The 1762-IF2OF2 is a MicroLogix expansion combination analog Input and Output module. This module is compatible for use with MicroLogix 1100, MicroLogix 1200 and MicroLogix 1400 controllers. This module features Two (2) Differential analog input channels, capable of receiving 0-10VDc or 4-20 mA signal. It also has Two (2) Single-Ended analog outputs providing 0-10VDC and 4-20 mA signal. This analog input module has a full-scale range of 0-10.5VDC and 0-21mA with resolution of 12 bits in unipolar mode. It has a built-in analog to digital circuitry using successive approximation as the moduleÕs conversion mode. Each channel has an overall accuracy of ±0.55% full scale at -20É65 ¡C (-4 ¡FÉ149 ¡F) and ±0.3% full scale at 25 ¡C (77 ¡F). The analog input channels are typically used for integrating measuring instruments such as Transmitters, Transducers, Indicators and other devices. These input channels support different sensor types such as 2-Wire and 3-Wire Transmitters where a 24VDC power supply connected in series provides power to the loop and 4-Wire transmitters where and independent power supply is used to energize the transmitter only to provide the specific analog signal. The analog output channels also has a full-scale range of 0-10.5VDC and 0-21mA with a Digital to Analog conversion type of Resistor String. The analog output channels has typical overall accuracy of ± 1.17% full scale @ -20É65 ¡C (-4 ¡FÉ149 ¡F) and ±0.5% full scale @ 25 ¡C (77 ¡F). When used with MicroLogix 1100, up to Four (4) 1762-IF2OF2 may be used. If used with MicroLogix 1200, up to Six (6) modules may be used and Seven (7) 1762-IF2OF2 may be used with MicroLogix 1400. This module measures of 90 x 40.4 x 87 mm (3.54 x 1.59 x 3.43 in.) Height including mounting tabs is 110 mm (4.33 in) and weighs 240g (0.53 lbs.). Similar to other 1762 Modules, the 1762-IF2OF2 combination module requires 50.88 mm or 2 inches clearance on all sides to promote natural air flow and cooling. This combination module has an internal switch for setting the input signal type. The switch is located on the circuit board. This switch is accessible through the ventilation slots on the top of the module. Switch 1 is intended to configure channel One (1) while Switch 2 is used to set Channel Two (2). On both channels, at Switch position OFF, signal type is set to Voltage while Current when switch is in ON position. When the module is delivered, the default setting is ON which is Current signal type. Output signal type is configured through the configuration file, accessible via the programming software. This module requires to be configured in the I/O configuration section of the RSLogix 500 Programming software. When configured successfully, the input channels of this module occupy Six (6) Words of Input data, configurable for Raw / Proportional format and Scaled for PID format. Another Six (6) Words is allocated for output data file configurable for the same data format. Included in the created registers are General status bits for input and output, Over-range Flag, and Under-range flags.
The Allen-Bradley 1762-IF2OF2 is a MicroLogix Expansion module with Two (2) Differential Analog inputs and Two (2) Single-Ended unipolar output channels. This module operates at an analog Voltage Range of 0-10 VDC and Current Range of 4-20 mA on both inputs and outputs. This module is compatible with MicroLogix 1100, MicroLogix 1200 and MicroLogix 1400 product family.

F.A.Q for 1762-IF2OF2

Q: 1. What are the transmitter types supported by the 1762-IF2OF2 module?A: This module supports 2. 3 and 40Wire Transmitters.
Q: 2. What is the part number of the rack to enable connection of the module to the main controller base?A: MicroLogix has a rackless design. It connects to the MicroLogix base module and to another module through the provided flat ribbon cable.
Q: 3. Can I use the 1762-IF2OF2 with 0-20 mA signal input?A: No, this module is designed for 4-20 mA and 0-10VDC. It may not properly display the measurement when used with 0-20 mA.

PDFsupply Tech

The 1762-IF2OF2 is an analog combination module that features compatibility with 0-10VDC and 4-20 mA signals. With the combination type I/O, this module offers cost effectiveness as it provides both type of analog I/O. This saves an important slot of any MicroLogix controllers as MicroLogix system only offers limited expansion module support.


PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.