A Global Supplier of Industrial Electronics

GE / IP FANUC Series 90/30 In Stock

A Global Supplier of Industrial Electronics

1-919-535-3180

1-800-360-6802

Mon-Fri 8AM-5PM EST

Allen Bradley | Point I/O

Allen Bradley | Point I/O | Image click here to request a quote

The Allen-Bradley 1734 POINT I/O system are Allen-Bradley Programmable Logic Controller (PLC) and Programmable Automation Controller (PAC) compatible components used for implementing simple I/O expansion to cost-effective distributed I/O system.

1734 POINT I/O modules are low densi...

The Allen-Bradley 1734 POINT I/O system are Allen-Bradley Programmable Logic Controller (PLC) and Programmable Automation Controller (PAC) compatible components used for implementing simple I/O expansion to cost-effective distributed I/O system.

1734 POINT I/O modules are low density modules, available in Discrete Input, Discrete Output, Analog Input, Analog Output, POINT Guard and Communication and Specialty modules. POINT I/O modules are designed for independent selection of I/O and network interface. It has also a variety of termination options, providing a more fast and secure connection method.

Point I/O systems are highly modular with a small and compact assembly. This system is ideally used for cost effectiveness as the modularity allows replacement of a portion of the module assembly and are highly scalable which means, modules may be added in the future with minimum disturbance. POINT I/O modules supports DIN rail installation and capable of fitting in tight and minimal installation space.

Standard Discrete Input and output modules supports a wide variety of voltages such as DC, AC and TTL ranges, with module level diagnostics such as short-circuit and open loop detection. Analog modules support up to eight single-ended input and output modules with specific modules compatible for Resistance Temperature Detector (RTD), Thermocouple, resistance and millivolt inputs. Each channel of the analog module are provided with software adjustable input filters to improve the module’s performance especially with erratic or fast changing process variables.

Specialty modules supported by the POINT I/O system include Counter and encoder and absolute module for use in High-speed counting, motion and position control typically used in the manufacturing industry, Synchronous Serial Interface for device level communication, Address Reserve Module (ARM) for securing a specific slot for future use and to save configuration, and Channel IO Link Master modules for communication with IO-Link enabled devices.

Communication modules supported by the POINT I/O system includes ControlNet, DeviceNet, Ethernet I/P and Profibus communication module. Ethernet communication adapters include 1734-AENT for linear Ethernet topology, 1734-AENTR for Redundant Ethernet communication; ControlNet communication module with catalog number 1734-ACNR with support for redundant ControlNet; DeviceNet communication modules such as 1734-AND, 1734-ADN(X), and 1734-PDN; and 1734-APB for ProfiBus communication.

Each communication adapter supports a maximum of 13 - 17 I/O modules or 10A field power limit. I/O modules are powered through the backplane. With an external power supply applied to a POINT I/O assembly, up to 63 modules or 504 channels may be assembled.
 
A complete and functional POINT I/O node is made of Four (4) components. These components include the I/O module itself, which holds the system interface and filed interface circuitries, Communication adapter or interfaces to allow communication to master / server devices, Power distribution modules used to provide system power to enable expandability and allow mixing of signal types and Terminal bases that provides wiring and field interface terminals to establish connection to field devices and instruments as well as power supplies and communication cables.   

Point I/O systems are compatible for use with CompactLogix and ControlLogix and configured using RSLogix 5000 or Studio 5000 Logix designer


Read More >
1734-232ASCThe Allen-Bradley 1734-232ASC is a POINT I/O ASCII Module. This module belongs to the POINT I/O family of distributed I/O modules which has an embedded One (1) serial channel supporting RS232, communication standard. It enables communication with peripheral products such as barcode reader and allows exchange of data up to 128 Bytes using through ASCII protocol. Buy Now
1734-485ASCThe Allen-Bradley 1734-485ASC is a POINT I/O ASCII Module. This module belongs to the POINT I/O family of distributed I/O modules which has an embedded One (1) serial channel supporting RS422/485 communication standard. It enables communication with peripheral products such as barcode reader and allows exchange of data up to 128 Bytes using through ASCII protocol. Buy Now
1734-8CFGThe Allen-Bradley 1734-8CFG is a POINT I/O module. This module has Eight (8) self-configuring I/O points and DeviceLogix capabilities. I/O can be configured as DC input or output. This module is capable of being removed or inserted to the communication adapter even under power. Buy Now
1734-8CFGDLXThe Allen-Bradley 1734-8CFG is a POINT I/O module. This module has Eight (8) self-configuring I/O points and DeviceLogix capabilities. Each I/O are configurable for DC input or output. This module is capable of being removed or inserted to the communication adapter even under power. Buy Now
1734-ACNRThe Allen-Bradley 1734-ACNR is a POINT I/O ControlNet communication adapter. This adapter belongs to the POINT I/O family of distributed I/O modules. This adapter has Two (2) ControlNet communication ports that is compatible with simples and Redundant ControlNet data Highway. This module supports up to 63 POINT I/O modules. Buy Now
1734-ADN

The Allen-Bradley 1734-ADN is a POINT I/O communication adapter used to enable communication of a POINT I/O rack to the master controller. With the embedded DeviceNet interface, Point I/O modules installed to its local bus can transfer I/O data with speeds of e 125K bit/s at 500m, 250K bit/s at 250m and 500K bit/s at 100m. This module is powered by a 24 Volt DC Input Voltage and support DIN rail mounting.


Buy Now
1734-ADNXThe Allen-Bradley 1734-ADNX is a POINT I/O communication adapter used to enable communication of a POINT I/O rack to the master controller. With the embedded DeviceNet interface, Point I/O modules installed to its local bus can transfer I/O data with speeds of 125K bit/s at 500m, 250K bit/s at 250m and 500K bit/s at 100m. This module supports implementation of DeviceNet subnet via the second Phoenix connector. This module is powered by a 24 Volt DC Input Voltage and support DIN rail mounting. Buy Now
1734-AENTThe Allen-Bradley 1734-AENT is a POINT I/O communication adapter used to enable communication of a POINT I/O rack to the master controller. It has One (1) Ethernet interface, supporting 10/100 Mbits/s, half or full-duplex. It supports Star and Tree topology. This module is powered by a 24 Volt DC Input Voltage and support DIN rail mounting. Buy Now
1734-AENTRThe Allen-Bradley 1734-AENTR is a POINT I/O communication adapter used to enable communication of a POINT I/O rack to the master controller. It has dual Ethernet interface, supporting 10/100 Mbits/s, half or full-duplex. It supports Star and Tree, Daisy Chain or Linear and Ring topologies. This module is powered by a 24 Volt DC Input Voltage and support DIN rail mounting. Buy Now
1734-APBThe Allen-Bradley 1734-APB is a POINT I/O communication adapter used to enable communication of a POINT I/O rack to the master controller. It has One (1) ProfiBus interface, supporting up to 12Mbits/s data transmission speed. It supports Daisy-chain topology and supports up to 63 POINT I/O modules. Buy Now
1734-ARMThe Allen-Bradley 1734-ARM is an Address Reserve Module that belongs to the POINT I/O product family. This module reserves a POINT I/O slot including for future installation of a POINT I/O module. It also protects the internal circuitry from dust and foreign contaminants. Buy Now
1734-CTMThe Allen-Bradley 1734-CTM is a Common Terminal Module. This module belongs to the POINT I/O product family. It is used for expanding termination capability of a POINT I/O assembly. This module is compatible with 1734-TB, 1734-TBS, 1734-TOP, or 1734-TOPS terminal assembly.Buy Now
1734-EP24DCThe Allen-Bradley 1734-EP24DC is a Point I/O 24VDC Power Supply. This module provides 24VDC filed power to POINT I/O modules installed to the right of the Power Supply. It extends the backplane bus power up to 17 additional I/O modules. This module has an output Current of 1 A @ 10-19.2V input or 1.3 A @ 19.2-28.8V input for Horizontal mounting and 1 A @ 10-28.8V input for Vertical mounting. Buy Now
1734-EPACThe Allen-Bradley 1734-EPAC is a Point I/O 120/240VAC Power Supply. This module provides 120/240VAC field power to POINT I/O modules installed to the right of the Power Supply. It extends the backplane bus power up to 17 additional I/O modules. This module has an output Current of 1 A @ 5.2VDC Vertical mounting or 1.3 A @ 5.2VDC Horizontal Mounting. Buy Now
1734-EXT1The Allen-Bradley 1734-EXT1 is a Point I/O bus extension cable. This cable permits an extended installation of POINT I/O system, allowing up to 1 meter extension. Buy Now
1734-EXT3The Allen-Bradley 1734-EXT3 is a Point I/O bus extension cable. This cable permits an extended installation of POINT I/O system, allowing up to 3-meter extension. Buy Now
1734-FPDThe Allen-Bradley 1734-FPD is a Field Potential Distributor Module. This module is used to modify the field power distribution source for POINT I/O modules installed to the right of this module. This module permits passage of POINT I/O backplane signals except the internal field bus power. This module may be used with 5-250VDC and 24-240VAC Voltage categories. Buy Now
1734-IA2The Allen-Bradley 1734-IA2 is a POINT I/O Discrete Input module. This module has Two (2) non-isolated sinking input channels, operating at 85-132VAC voltage range. It is compatible with any POINT I/O communication adapters. Buy Now
1734-IA4The Allen-Bradley 1734-IA4 is a POINT I/O Discrete Input module. This module has Four (4) non-isolated sinking input channels, operating at 85-132VAC voltage range. It is compatible with any POINT I/O communication adapters. Buy Now
1734-IB2The Allen-Bradley 1734-IB2 is a POINT I/O Discrete Input module. This module has Two (2) sinking input channels, operating at 10-28.8VDC voltage range. It is compatible with any POINT I/O communication adapters. Buy Now
1734-IB4The Allen-Bradley 1734-IB4 is a POINT I/O Discrete Input module. This module has Four (4) sinking input channels, operating at 10-28.8VDC voltage range. It is compatible with any POINT I/O communication adapters. Buy Now
1734-IB4DThe Allen-Bradley 1734-IB4D is a POINT I/O Discrete Input module. This module has Four (4) sinking input channels with short-circuit and open-wire diagnostics. This input channels of this module operates at 10-28.8VDC voltage range. It is compatible with any POINT I/O communication adapters. Buy Now
1734-IB8The Allen-Bradley 1734-IB8 is a POINT I/O Discrete Input module. This module has Eight (8) sinking input channels, operating at 10-28.8VDC voltage range. It is compatible with any POINT I/O communication adapters.Buy Now
1734-IB8SThe Allen-Bradley 1734-IB8S is a POINT Guard I/O Safety Discrete Input module. This module has Eight (8) current sinking input channels at 11-30V, 3.5 mA DC and Four (4) Current Sourcing Pulse Test Output Channels at maximum 0.7 A. Available module series includes series A and Series B. Buy Now
1734-IE2CThe Allen-Bradley 1734-IE2C is a POINT I/O analog input module. This module has Two (2) single-ended input, non-isolated current input channels. It is compatible with input signal of 0-20 mA and 4-20 mA with 16-bit resolution. Buy Now
1734-IE2VThe Allen-Bradley 1734-IE2V is a POINT I/O analog input module. This module has Two (2) single-ended input, non-isolated current input channels. It is compatible with user-configurable input signals of 0-10VDC, (-0.0V under, +0.5V over) and ±10V, (-0.5V under, +0.5V over). Buy Now
1734-IE4CThe Allen-Bradley 1734-IE4C is a POINT I/O analog input module. This module has Four (4) single-ended input, non-isolated current input channels. It is compatible with input signal of 0-20 mA and 4-20 mA with 16-bit resolution. Buy Now
1734-IE4SThe Allen-Bradley 1734-IE4S is a POINT GUARD I/O Safety analog input module. This module has Four (4) channels compatible with ±10V, ±5V, 0-5V, 0-10V, 4-20 mA, 0-20 mA, and Tachometer. This module supports Single or Dual channel mode. Buy Now
1734-IE8CThe Allen-Bradley 1734-IE8C is a POINT I/O analog input module. This module has Eight (8) single-ended input, non-isolated current input channels. It is compatible with input signal of 0-20 mA and 4-20 mA with 16-bit resolution. Buy Now
1734-IJThe Allen-Bradley 1734-IJ is a POINT I/O Encoder and Counter input module. This module has One (1) input channel in a single group of A/A return, B/B return and Z/Z return signals. This module accepts an input voltage of 5V. Buy Now
1734-IKThe Allen-Bradley 1734-IK is a POINT I/O Encoder and Counter input module. This module has One (1) input channel in a single group of A/A return, B/B return and Z/Z return signals. This module accepts an input voltage of 15-24V DC. Buy Now
1734-IM2The Allen-Bradley 1734-IM2 is a POINT I/O Discrete Input module. This module has Two (2) non-isolated, sinking input channels, operating at 159-264VAC voltage range at 47-63Hz frequency. It is compatible with any POINT I/O communication adapters. Buy Now
1734-IM4The Allen-Bradley 1734-IM4 is a POINT I/O Discrete Input module. This module has Four (4) non-isolated, sinking input channels, operating at 159-264VAC voltage range at 47-63Hz frequency. It is compatible with any POINT I/O communication adapters. Buy Now
1734-IR2The 1734-IR2 is a POINT I/O RTD Input module. This module has Two (2) RTD channels compatible for 2-Wire and 3-Wire RTD sensor. This module is compatible with a variety of RTDs such as 100 Pt _ = 0.00385 Euro -328...1598 ¡F (-200...+870 ¡C), 200 Pt _ = 0.00385 Euro -328...1166 ¡F (-200...+630 ¡C), 100 Pt _ = 0.003916 U.S. -328...1166 ¡F (-200...+630 ¡C), 200 Pt _ = 0.003916 U.S. -328...1166 ¡F (-200...+630 ¡C), 10 Cu _ = 0.00427 -328...500 ¡F (-200...+260 ¡C), 100 Ni _ = 0.00618 -76...+482 ¡F (-60...+250 ¡C), 120 Ni _ = 0.00618 -76...+482 ¡F (-60...+250 ¡C) and 120 Ni _ = 0.00672 -76...+482 ¡F (-60...+250 ¡C).Buy Now
1734-IR2EThe 1734-IR2E is a POINT I/O RTD Input module. This module has Two (2) RTD channels compatible for 2-Wire and 3-Wire RTD sensor. This module is compatible with a specific RTD sensor such as 100 ½ Pt, _ = 0.00385 Euro -50É320 ¡C (-58É608 ¡F).Buy Now
1734-IT2IThe 1734-IT2I is a POINT I/O Thermocouple Input module. This module has Two (2)differential and isolated millivolt inputs, compatible with Thermocouple types such as B, C, E, J, K, R, N, S and T and millivolt signal with range of -70 mV - +70 mV. Buy Now
1734-IV2The Allen-Bradley 1734-IV2 is a POINT I/O Discrete Input module. This module has Two (2) source input channels, operating at 10-28.8VDC voltage range. It is compatible with any POINT I/O communication adapters. Buy Now
1734-IV4The Allen-Bradley 1734-IV4 is a POINT I/O Discrete Input module. This module has Four (4) source input channels, operating at 10-28.8VDC voltage range. It is compatible with any POINT I/O communication adapters. Buy Now
1734-IV8The Allen-Bradley 1734-IV8 is a POINT I/O Discrete Input module. This module has Eight (8) source input channels, operating at 10-28.8VDC voltage range. It is compatible with any POINT I/O communication adapters. Buy Now
1734-MBThe Allen-Bradley 1734-MB is a POINT I/O mounting base. Mounting base provides installation point of the Removable Terminal Block (RTB) and POINT I/O modules. Buy Now
1734-OA2The Allen-Bradley 1734-OA2 is a POINT I/O Discrete Input module. This module has Two (2) non-isolated sourcing output channels, operating at 85-264VAC voltage range. It is compatible with any POINT I/O communication adapters. Buy Now
1734-OA4The Allen-Bradley 1734-OA4 is a POINT I/O Discrete Input module. This module has Four (4) non-isolated sourcing output channels, operating at 85-264VAC voltage range. It is compatible with any POINT I/O communication adapters. Buy Now
1734-OB2The Allen-Bradley 1734-OB2 is a POINT I/O Discrete Output module. This module has Two (2) source output channels, operating at 10-28.8VDC voltage range. It is compatible with any POINT I/O communication adapters. Buy Now
1734-OB2EThe Allen-Bradley 1734-OB2E is a POINT I/O Discrete Output module. This module has Two (2) Protected source output channels, operating at 10-28.8VDC voltage range. It is compatible with any POINT I/O communication adapters. Buy Now
1734-OB2EPThe Allen-Bradley 1734-OB2EP is a POINT I/O Discrete Output module. This module has Two (2) Electronically Protected source output channels, operating at 10-28.8VDC voltage range. It is compatible with any POINT I/O communication adapters. Buy Now
1734-OB4The Allen-Bradley 1734-OB4 is a POINT I/O Discrete Output module. This module has Four (4) source output channels, operating at 10-28.8VDC voltage range. It is compatible with any POINT I/O communication adapters. Buy Now
1734-OB4EThe Allen-Bradley 1734-OB4E is a POINT I/O Discrete Output module. This module has Four (4) Protected source output channels, operating at 10-28.8VDC voltage range. It is compatible with any POINT I/O communication adapters. Buy Now
1734-OB8The Allen-Bradley 1734-OB8 is a POINT I/O Discrete Output module. This module has Eight (8) source Buy Now
1734-OB8EThe Allen-Bradley 1734-OB8E is a POINT I/O Discrete Output module. This module has Eight (8) Protected source output channels, operating at 10-28.8VDC voltage range. It is compatible with any POINT I/O communication adapters. Buy Now
1734-OB8SThe Allen-Bradley 1734-OB8S is a POINT Guard I/O Safety Discrete Output module. This module has Eight (8) current sourcing safety output channels at operating at 19.2-28.8VDC. Each channel has an output current of 1A per channel. This module supports Single and Dual Channel mode operation. Buy Now
1734-OE2CThe Allen-Bradley 1734-OE2C is a POINT I/O analog output module. This module has Two (2) single-ended, non-isolated current output channels. The module has 0 mA output until communication established and configurable for 4-20 mA or 0-20mA outputs. Buy Now
1734-OE2VThe Allen-Bradley 1734-OE2V is a POINT I/O analog output module. This module has Two (2) single-ended, non-isolated voltage output channels. The module has 0V output until communication established and configurable for 0-10V, and +/- 10V. Buy Now
1734-OE4CThe Allen-Bradley 1734-OE4C is a POINT I/O analog output module. This module has Four (4) single-ended, non-isolated current output channels. The module has 0 mA output until communication established and configurable for 4-20 mA or 0-20mA outputs. Buy Now
1734-OV2EThe Allen-Bradley 1734-OV2E is a POINT I/O Discrete Output module. This module has Two (2) Protected sink output channels, operating at 10-28.8VDC voltage range. It is compatible with any POINT I/O communication adapters. Buy Now
1734-OV4EThe Allen-Bradley 1734-OV4E is a POINT I/O Discrete Output module. This module has Four (4) Protected sink output channels, operating at 10-28.8VDC voltage range. It is compatible with any POINT I/O communication adapters. Buy Now
1734-OV8EThe Allen-Bradley 1734-OV8E is a POINT I/O Discrete Output module. This module has Eight (8) Protected sink output channels, operating at 10-28.8VDC voltage range. It is compatible with any POINT I/O communication adapters. Buy Now
1734-OW2The Allen-Bradley 1734-OW2 is a POINT I/O Discrete Output module. This module has Two (2) Form A isolated (normally open) electromechanical relay contacts with contact ratings of 120/240V or 5-30V DC voltage range. It is compatible with any POINT I/O communication adapters. Buy Now
1734-OW4The Allen-Bradley 1734-OW4 is a POINT I/O Discrete Output module. This module has Four (4) Form A isolated (normally open) electromechanical relay contacts with contact ratings of 120/240V or 5-30V DC voltage range. It is compatible with any POINT I/O communication adapters. Buy Now
1734-OX2The Allen-Bradley 1734-OX2 is a POINT I/O Discrete Output module. This module has Two (2) isolated Form C Normally Open (N.O.) and Normally Closed (N.C) electromechanical relay contacts with load dependent output voltage compatible with 5-28.8V dc @ 2.0A resistive; 48V dc @ 0.5A resistive; 125V dc @ 0.25A resistive; 125V ac @ 2.0A resistive and 240V ac @ 2.0A resistive.Buy Now
1734-PDNThe Allen-Bradley 1734-PDN is a POINT I/O interface communication module. It supports transmission speed of 125K bit/s at 500m, 250K bit/s at 250m and 500K bit/s at 100m. Up to Seventeen (17) modules may be installed, dependent on the backplane bus current draw. This module is powered by a 24 Volt DC Input Voltage and support DIN rail mounting. Buy Now
1734-RTBThe Allen-Bradley 1734-RTB is a POINT I/O Removable Terminal Block (RTB) with Eight (8) cage clamp terminal. This terminal block is a replacement unit for the 1734-TB. Buy Now
1734-RTB3The Allen-Bradley 1734-RTB3 is a POINT I/O Removable Terminal Block (RTB) with Twelve (12) cage clamp terminals. This terminal block is a replacement unit for the 1734-TB3. Buy Now
1734-RTB3SThe Allen-Bradley 1734-RTB3S is a POINT I/O Removable Terminal Block (RTB) with Twelve (12) spring clamp terminals. This terminal block is a replacement unit for the 1734-TB3S. Buy Now
1734-RTBCJCThe Allen-Bradley 1734-RTBCJC is a POINT I/O Cold Junction Compensation wiring assembly. This wiring assembly has Eight (8) screw clamp terminals. This terminal block is used with 1734-IT2I Thermocouple Input module. Buy Now
1734-RTBSThe Allen-Bradley 1734-RTBS is a POINT I/O Removable Terminal Block (RTB) with Eight (8) Spring clamp terminal. This terminal block is a replacement unit for the 1734-TBS. Buy Now
1734-SSIThe Allen-Bradley 1764-232ASC is a POINT I/O Synchronous Serial Interface Module. This module belongs to the POINT I/O family of distributed I/O modules which has an embedded One (1) SSI channel used to interface any absolute encoder module supporting SSI protocol. The module supports SSI data rates of 125 kHz, 250 kHz, 500 kHz, 1 MHz and 2 MHz. Buy Now
1734-TBThe Allen-Bradley 1734-TB is a POINT I/O Terminal Base assembly. This assembly is composed of an Eight (8) cage clamp terminal and a mounting base, along with the locking mechanisms and RTB handle. Buy Now
1734-TB3The Allen-Bradley 1734-TB3 is a POINT I/O Terminal Base assembly. This assembly is composed of an Twelve (12) cage clamp terminal and a mounting base, along with the locking mechanisms and RTB handle. Buy Now
1734-TB3Q10The Allen-Bradley 1734-TB3Q10 is a POINT I/O Terminal Base assembly in quantities of Ten (10). This assembly is composed of Ten (10), Twelve (12) screw cage terminals and Ten (10) mounting base, along with the individual locking mechanisms and RTB handles. Buy Now
1734-TB3SThe Allen-Bradley 1734-TB3S is a POINT I/O Terminal Base assembly. This assembly is composed of a Twelve (12) spring clamp terminal and a mounting base, along with the locking mechanisms and RTB handle. Buy Now
1734-TBCJCThe Allen-Bradley 1734-TBCJC is a POINT I/O Cold Junction Compensation wiring assembly. This wiring assembly has Eight (8) screw clamp terminals and a mounting base. This wiring assembly is used with 1734-IT2I Thermocouple Input module. Buy Now
1734-TBQ10The Allen-Bradley 1734-TBQ10 is a POINT I/O Terminal Base assembly in quantities of Ten (10). This assembly is composed of Ten (10), Eight (8) screw cage terminals and Ten (10) mounting base, along with the individual locking mechanisms and RTB handles. Buy Now
1734-TBSThe Allen-Bradley 1734-TBS is a POINT I/O Terminal Base assembly. This assembly is composed of an Eight (8) spring clamp terminal and a mounting base, along with the locking mechanisms and RTB handle. Buy Now
1734-TBSQ10The Allen-Bradley 1734-TBSQ10 is a POINT I/O Terminal Base assembly in quantities of Ten (10). This assembly is composed of Ten (10), Eight (8) spring clamp terminals and Ten (10) mounting base, along with the individual locking mechanisms and RTB handles. Buy Now
1734-TOPThe Allen-Bradley 1734-TOP is a POINT I/O Terminal Base. This hardware has Eight (8) Terminations and Screw-clamp termination type. Buy Now
1734-TOP3The Allen-Bradley 1734-TOP3 is a POINT I/O Terminal Base. This hardware has Twelve (12) Terminations and Screw-clamp termination type. Buy Now
1734-TOP3SThe Allen-Bradley 1734-TOP3S is a POINT I/O Terminal Base. This hardware has Twelve (12) Terminations and Spring-clamp termination type. Buy Now
1734-TOPSThe Allen-Bradley 1734-TOPS is a POINT I/O Terminal Base. This hardware has Eight (8) Terminations and Spring-clamp termination type. Buy Now
1734-VHSC24The Allen-Bradley 1734-VHSC24 is a POINT I/O Very High Speed Counter Module. This module has One (1) Ð 1 group of A/Aret, B/Bret and Z/Zret inputs and One (1) isolated group of 2 capable of 0.5 A @ 24V DC outputs. It supports a variety of operating modes such as Counter, Encoder, Period / Rate, Continuous/Rate, Rate Measurement and PWM mode. Buy Now
1734-VHSC5The Allen-Bradley 1734-VHSC5 is a POINT I/O Very High-Speed Counter Module. This module has One (1) Ð 1 group of A/Aret, B/Bret and Z/Zret inputs and One (1) isolated group of 2 capable of 0.5 A @ 24V DC outputs. The moduleÕs input voltage is 5VDC and input Current of 19.1 mA at 5V DC and 25.7 mA at 6V DC. It supports a variety of operating modes such as Counter, Encoder, Period / Rate, Continuous/Rate, Rate Measurement and PWM mode. Buy Now
1734-VTMThe Allen-Bradley 1734-VTM is a Voltage Terminal Module. This module belongs to the POINT I/O product family. It is used for expanding termination capability of a POINT I/O assembly, compatible for both sinking and wiring configuration of 2-Wire or 3-Wire sensors. This module is compatible with 1734-TB, 1734-TBS, 1734-TOP, or 1734-TOPS terminal assembly.Buy Now
1734D-IA16The Allen-Bradley 1734D-IA16 is a POINTBlock AC Discrete Input module. This module has Sixteen (16) input channels, operating at 85-132VAC voltage range. This module has integrated DeviceNet communication interface. Buy Now
1734D-IA16SThe Allen-Bradley 1734D-IA16S is a POINTBlock AC Discrete Input module. This module has Sixteen (16) input channels, operating at 85-132VAC voltage range. It has an integrated DeviceNet communication interface and a wiring block that uses spring clamp connections. Buy Now
1734D-IA8XOA8The Allen-Bradley 1734D-IA8XOA8 is a POINTBlock combination module. This module has Eight (8) 120VAC input channels and Eight (8) 120VAC output channels. It has an integrated DeviceNet communication interface and a wiring block that uses cage clamp connections. Buy Now
1734D-IA8XOA8SThe Allen-Bradley 1734D-IA8XOA8S is a POINTBlock combination module. This module has Eight (8) 120VAC input channels and Eight (8) 120VAc output channels. It has an integrated DeviceNet communication interface and a wiring block that uses spring clamp connections. Buy Now
1734D-IA8XOW8The Allen-Bradley 1734D-IA8XOW8 is a POINTBlock combination module. This module has Eight (8) 85-132VAC, 47-63Hz input channels and Eight (8) Relay output channels. It has an integrated DeviceNet communication interface and a wiring block that uses cage clamp connections. Buy Now
1734D-IA8XOW8SThe Allen-Bradley 1734D-IA8XOW8S is a POINTBlock combination module. This module has Eight (8) 85-132VAC, 47-63Hz input channels and Eight (8) Relay output channels. It has an integrated DeviceNet communication interface and a wiring block that uses spring clamp connections. Buy Now
1734D-IB16The Allen-Bradley 1734D-IB16 is a POINTBlock DC Input module. This module has Sixteen (16) 10-28.8 VDC input channels. It has an integrated DeviceNet communication interface and a wiring block that uses cage clamp connections. Buy Now
1734D-IB16SThe Allen-Bradley 1734D-IB16S is a POINTBlock DC Input module. This module has Sixteen (16) 10-28.8 VDC input channels. It has an integrated DeviceNet communication interface and a wiring block that uses spring clamp connections. Buy Now
1734D-IB8XOB8EThe Allen-Bradley 1734D-IB8XOB8E is a POINTBlock combination module. This module has Eight (8) 24VDC input channels and Eight (8) 24VDC output channels. It has an integrated DeviceNet communication interface and a wiring block that uses cage clamp connections. Buy Now
1734D-IB8XOB8ESThe Allen-Bradley 1734D-IB8XOB8ES is a POINTBlock combination module. This module has Eight (8) 24VDC input channels and Eight (8) 24VDC output channels. It has an integrated DeviceNet communication interface and a wiring block that uses spring clamp connections. Buy Now
1734D-IB8XOW8The Allen-Bradley 1734D-IB8XOW8 is a POINTBlock combination module. This module has Eight (8) 24VDC input channels and Eight (8) Relay output, Form A channels. It has an integrated DeviceNet communication interface and a wiring block that uses cage clamp connections. Buy Now
1734D-IB8XOW8SThe Allen-Bradley 1734D-IB8XOW8S is a POINTBlock combination module. This module has Eight (8) 24VDC input channels and Eight (8) Relay output, Form A channels. It has an integrated DeviceNet communication interface and a wiring block that uses spring clamp connections. Buy Now
1734sc-IE2CHThe Allen-Bradley 1734sc-IE2CH is an encompass partner module manufactured by Spectrum controls. This module has Two (2) single-ended 4-20mA input plus HART protocol. It is compatible the POINT I/O system. Buy Now
1734sc-IE4CHThe Allen-Bradley 1734sc-IE4CH is an encompass partner module manufactured by Spectrum controls. This module has Four (4) single-ended 4-20mA input plus HART protocol. It is compatible the POINT I/O system. Buy Now
1734sc-IF4UThe Allen-Bradley 1734sc-IF4U is an encompass partner module manufactured by Spectrum controls. This module is a universal input module that is compatible with Thermocouple sensors J, K, T, E; RTD sensors such as PT385/3916, Ni618/672, NiFe518, Cu426; Resistance 0-150, 0-1000, 0-3000 ohms; Current signals 0-20 mA, 4-20 mA and Voltage signals ±50 mV, ±100 mV, 0-5 V, 1-5 V, 0-10 V, ±10 V. This module is compatible for use with POINT I/O modules. Buy Now
1734sc-OE2CIHThe Allen-Bradley 1734sc-OE2CIH is an encompass partner module manufactured by Spectrum controls. This module has Two (2) isolated output channels with output ranges of 0-20 mA; 4-20 mA plus HART. It is compatible with Allen-BradleyÕs POINT I/O system. Buy Now
ILX34-MBS232The Allen-Bradley ILX34-MBS232 is a Modbus Serial Module for CompactLogix L1 and Point I/O Adapters. This is manufactured by Prosoft Technologies, an Allen-Bradley encompass partner company. This module has One (1) Full-Duplex channel support RS232 communication standard and supports baud rate 110 to 38.4K baud. Buy Now
ILX34-MBS485The Allen-Bradley ILX34-MBS485 is a Modbus Serial Module for CompactLogix L1 and Point I/O Adapters. This module is manufactured by Prosoft Technologies, an Allen-Bradley encompass partner company. This module has One (1) Full-Duplex channel support RS485 communication standard and supports baud rate 110 to 38.4K baud. Buy Now

PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.