GE / IP FANUC Series 90/30 In Stock
Notice: By clicking this link, you will be redirected away from PDFsupply.com to DOsupply.com
The 1756-IA8D is a ControlLogix Diagnostic Input Module with 8 Diagnostic Inputs manufactured by Allen-Bradley. The module will use the ControlLogix system clock from a PLC to generate timestamps for a fault when it occurs or when it is cleared. This is all conducted with 1 millisecond of accuracy and it leaves users with further information processing. The RTB housings that can be mounted on this module are the 1756-TBCH and the 1756-TBS6H. The 1756-IA8D’s voltage category is 120 Volts AC. This module has a maximum power dissipation of 4.5 Watts at 60 Degrees Celsius and 0.58 Watts of backplane power.
The 1756-IA8D has 8 individually isolated inputs and a change of state function for each individual channel is manually configurable. For this purpose, operators will use the RSLogix 5000 software. This software also enables users to configure the power loss detection of the module. Make sure to configure this feature only for the points that are in use. The loss of power is configured in the 46 to 85 Volts range. The operating temperature of the device is 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit). The module keying is electronic and software-configurable. By using software, over module properties, users can activate the diagnostic latching feature to latch a fault in the set position even when the error is cleared. The Allen-Bradley 1756-IA8D module has status indicators for the users to visually inspect the module with one glance. On the front side of the module, there are OK status and I/O status LED lights. There is also a locking key.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.