1-919-535-3180 | 1-800-360-6802
sales@pdfsupply.com

GE / IP FANUC Series 90/30 In Stock

A Global Supplier of Industrial Electronics

1-919-535-3180

1-800-360-6802

Mon-Fri 8AM-5PM EST

sales@pdfsupply.com

1756-IH16ISOE

Rated 4.1/5 Based on 28 ratings.

Rate your purchase of the 1756-IH16ISOE

Preowned
Includes a PDF Electric and Supply warranty.

Refurbished

Call

Available

2 Yr PDF Supply Warranty

What is Refurbished?

Repair Service

$477

5-10 Days

2 Yr PDF Supply warranty

 

Other Available Revisions for the 1756-IH16ISOE 1756-IH16ISOE/A

Common misspellings:
  • l756-IH16ISOE
  • 1756-1H16ISOE
  • 1756-lH16ISOE
  • 1756-IHl6ISOE
  • 1756-IH161SOE
  • 1756-IH16lSOE
  • 1756-IH16IS0E
  • 1756IH16ISOE

The 1756-IH16ISOE is a 16-point digital input module from Allen-Bradley/Rockwell Automation. The 1756-IH16ISOE uses either the 1756-TBCH (36-pin cage clamp) or the 1756-TBS6H (36-pin spring clamp) removable terminal block to connect the module with I/O modules. The module can operate with a maximum voltage of 140 Volts DC and with 90 Volts DC minimum. The inputs for the 1756-IH16ISOE apply the sequence of events and the 1756-IH16ISOE is part of the ControlLogix systems. The module operates at a maximum ambient temperature of 60 degrees Celsius. The 1756-IH16ISOE digital input module has a conducted RF immunity of 10 Volts RMS when the sine wave has a frequency of 1 kilohertz. Additionally, for the input delays, the 1756-IH16ISOE supports an OFF/ON firmware scan time of 25 microseconds (maximum), a filter time ranging from 0 to 50 milliseconds, and a normal hardware delay of 10 microseconds (20 microseconds maximum).

The ON/OFF scan times for the 1756-IH16ISOE are identical to the OFF/ON ratings. However, the hardware delay times for the ON/OFF operation are 75 microseconds maximum and 50 microseconds normal. The module dissipates 5.5 watts at 60 degrees Celsius and 17.2 BTU per hour. The 1756-IH16ISOE consumes a total of 1.3 watts from the backplane. The module has an input impedance of 74.8 kiloohms and has an isolation voltage of 250 Volts (continuous) tested for 2 seconds at a voltage of 1350 Volts AC. The isolation covers input-to-backplane and input-to-input. The 1756-IH16ISOE has maximum off and on state currents of 0.3 mA and 1.85 mA, respectively. The 1756-IH16ISOE’s change-of-state is software-configurable and it has a +/-100 microseconds timestamp at the inputs.

125 VDC Isolated Sequence of Event Input 16Pt (36 Pin)

All online orders placed before 4:30 PM EST “SHIPS SAME DAY FREE!" World’s largest warehouse of Factory Sealed GE 90-30 PLC, GENIUS I/O and RX7i PACSystem.highlight_off

PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.