GE / IP FANUC Series 90/30 In Stock

Call Now




Rated 4.5/5 Based on 9 ratings.

Rate your purchase of the 1756-PA75

Allen Bradley | ControlLogix | 1756-PA75 | Image

Allen Bradley | ControlLogix | 1756-PA75 | Image Allen Bradley | ControlLogix | 1756-PA75 | Image

SKU 2171365  UPC 0799705794290

Allen Bradley products are now sold by our affiliate company

Notice: By clicking this link, you will be redirected away from to

Designed as part of the ControlLogix line of products, the 1756-PA75 is an AC Power Supply that is manufactured by Allen-Bradley/Rockwell Automation. This module is non-redundant, and should be mounted on the left side of the Series B chassis from the same line of products. Weighing approximately 1 kilogram (2.5 pounds), the power supply is 140 millimeters (5.5 inches) high, 112 millimeters (4.4 inches) wide, and 145 millimeters (5.7 inches) deep. This power supply features a nominal input voltage of 120 to 240 Volts AC, while providing protection against overcurrent. The transformer load of 1756-PA75 for the aforementioned power input is 100 Volt-Amperes. Reinforced insulation is another outstanding feature of the 1756-PA75, and it was tested for 60 seconds at 3,500 Volts DC. The module has an input frequency rating ranging between 47 and 63 Hertz, and a power supply output of 74 Watts at 60 degrees Celsius.

The 1756-PA75 features a Hold Up Time function that refers to the time between a DC power failure and input voltage removal. The module can tolerate +/- 10% oscillations in AC power supply for 15 minutes, and over 95% of interruptions at AC ports. In addition to this, the module also comes with certifications, such as UL, CSA, CE and so on, and it is designed for use in industrial, hazardous settings. Furthermore, it is worth noting that the power dissipation of 1756-PA75 is 85.3 BTU per hour. It is important to point out that this part features a fuse that cannot be replaced and serves as protection against fire caused by short circuits. The rugged design of the 1756-PA75 is perfect for use in an industrial environment with Level 2 Pollution and application from Category II. This durable module can operate in an environment with temperatures as high as 60 degrees Celsius (140 degrees Fahrenheit) without derating.

PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.