1-919-535-3180 | 1-800-360-6802
sales@pdfsupply.com

GE / IP FANUC Series 90/30 In Stock

A Global Supplier of Industrial Electronics

1-919-535-3180

1-800-360-6802

Mon-Fri 8AM-5PM EST

sales@pdfsupply.com

1756-PSCA2

Rated 4/5 Based on 22 ratings.

Rate your purchase of the 1756-PSCA2

Image of

Image of

Preowned
Includes a PDF Electric and Supply warranty.

Surplus
(Never Used)

Call

Available

3 Yr PDF Supply warranty

What is Surplus?

Refurbished

$112

10 In Stock

2 Yr PDF Supply Warranty

What is Refurbished?

Other Available Revisions for the 1756-PSCA2 1756-PSCA2/A

Common misspellings:
  • l756-PSCA2
  • 1756PSCA2

The 1756-PSCA2 is a Chassis Adapter Module for a redundant power supply. Manufactured by Allen Bradley under the ControlLogix series, this module comes with shipping weight of 8.1 ounces and shipping dimensions of 1.38 x 6 x 5.81 inches. It is mounted on left chassis and comes with 3 RTBs featuring a 1756-TBSH or a 1756-TBNH. The module can endure an operating temperature of 0 to 60 degrees Celsius while the recommended storage temperature for the 1756-PSCA2 is -45 to 60 degrees Celsius. The module can be placed on either of the slots on the left side chassis. With a Backplane current of 125 Milliamps at 24 Volts, the 1756-PSCA2 has a maximum power Dissipation of 25.7 Watts at 30 degrees Celsius and at 60 degrees Celsius, the maximum power dissipation is 21.3 Watts. This module provides two redundant power supplies into a single power connector on the chassis backplane and it is also an essential component when it comes to building ControlLogix Redundant Power Supply Systems. Only one of them is required for creating a system and comes compatible with the bulletin 1756-PA75R and the 1756-PB75R power supplies. Being an open type device, the 1756-PSCA2 redundant power supply has a current capacity of 1.5 Amps at 1.2 Volts DC, has 4 Amps at 3.3 Volts DC, 15 Amps at 5.1 Volts DC and 2.8 Amps at 24 Volts DC. Basically, the module is usually mounted horizontally on the left chassis and the left side cable used to connect the 1756-CPR2 to power supply. This cable comes with a bend of 5 inches as the minimum clearance to route and connect parts.

Allen Bradley Redundant Power Supply Chassis Adapter Module 1756-PSCA

All online orders placed before 4:30 PM EST “SHIPS SAME DAY FREE!" World’s largest warehouse of Factory Sealed GE 90-30 PLC, GENIUS I/O and RX7i PACSystem.highlight_off

PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.