GE / IP FANUC Series 90/30 In Stock
Notice: By clicking this link, you will be redirected away from PDFsupply.com to DOsupply.com
The 756-RM2XT is an Allen Bradley enhanced redundancy module for use in an extreme environment where a redundant system is required. The 756-RM2XT is engineered under the ControlLogix series and works as a pair in each of the Chassis. The main role is to act as supervisor for the operating states and the state transitions which act as the state transitions that act as foundations for a redundant operation framework. The module is an effective interference-free and it is ideal for use in the ControlLogix SIL 2 Applications. ControlLogix Firmware bundles version 20.054 and greater provides supports for the 756-RM2XT to ensure it has a high availability. Being part of the ControlLogix Redundancy Module Series, the 756-RM2XT supports ControlLogix 5560 and the ControlLogix 5570 controller families. If using for redundant pairing, the primary 756-RM2XT should not be connected to a secondary module unless the firmware is updated to correct revision with all components installed and correctly configured.
The 756-RM2XT is mostly used together with other enhanced redundancy modules and cannot be utilized with 1756-RM/A, the 1756-RM/B or the 1756-RMXT. The module is rated for utilization in the extreme environments where or that is characterized with harsh conditions. It draws an operating current of 1.16 Amps, and 3.4 mA at 5.1 Volts DC and 24 Volts DC power supplies from the backplane. The 756-RM2XT comes with a maximum power dissipation of 6 Watts and the thermal dissipation is rated at 21 BTU per hour. The 756-RM2XT occupies a single slot and is usually installed on either of the chassis slots. 756-RM2XT is compatible with the Bulletin 1756-RMC series of the connector cables with the standard 1756-PAXT and 1756-PBXT as the power supplies.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.