GE / IP FANUC Series 90/30 In Stock
SKU 2172340 UPC 0799705793200
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The Allen-Bradley 1771-A3B1 is a universal I/O chassis that isused for mounting the 1771 I/O modules. It supports only the back panel mounting type and it has 12 I/O mounting slots. The 1771-A3B1 is a standalone chassis and it weighs 5.7 kgs. When mounting the 1771 I/O modules onto the chassis, the electrical requirement of the modules should be taken into consideration. The modules should be mounted from right to left.
The spacing guidelines should be adhered to when mounting modules on the 1771-A3B1. Four inches of space should be left between the 1771-A3B1 chassis enclosure walls and a major component, 6 inches should be the minimum space between the major components in the vertical position, and a spacing of 4 inches should be left between the major components when mounted horizontally. Additionally, a spacing of 6 inches should be left between the top or bottom of the 1771-A3B1 chassis enclosure and the major 1771 I/O modules when mounted vertically and 6 inches should be left free between the wiring ducts and a major component.
The 1771-A3B1 is purposely intended for use in an industrial environment which has a non-condensing relative humidly range of 5-95%. The 1771-A3B1 chassis has a non-operating temperature rating of -40-85 degrees Celsius. The module approximately measure 315mm by 483mm by 193mm. The 1771-A3B1 operates in environments that have a temperature not exceeding 60 degrees Celsius. In case of expansions, the 1771-A3B1 can be replaced with ease with a bigger chassis. The 1771-P1, 1771-P2, 1771-P7 and the 1771-PS7 power supplies can only be mounted on the right-side plate of the 1771-A3B1 chassis.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.