GE / IP FANUC Series 90/30 In Stock
SKU 2175467 UPC 0799705797970
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
Notice: By clicking this link, you will be redirected away from PDFsupply.com to DOsupply.com
The 1771-ID16K is a digital input module manufactured by Allen-Bradley. It belongs to the B series. The 1771-ID16K has an input voltage range of 74 to 138 Volts AC at 47 to 63 Hertz and 105 to 138 Volts DC, with a nominal input voltage of: 120 Volts AC/DC. And it has an on-state voltage range between 74 Volts AC, 105 Volts DC as the minimum and an off-state voltage: 45 Volts AC, 66 Volts DC as the maximum voltage. There is also an on-state current of 6 milliamps At 74 Volts AC as the minimum, and the off-state current of 4 milliamps at 45 Volts AC, 47 to 63 Hertz, besides a 0.8 mA current at 63 Volts DC minimum. In addition to that, the 1771-ID16K has a power dissipation of 1 to 8.8 Watts and temperature rating of 32 to 140 degrees Fahrenheit. The 1771-ID16K has a cable length of 1000 feet. It consists of customer-selectable input filtering to restrict the effects of voltage transients caused by a contact bounce or radiated electrical noise. The 1771-ID16K is made to operate with limit, float, selector, and pushbutton switches.
It has an active indicator (green) and an input status indicator (red). It can be connected with an AC output module (the 1171-OA, 1171-OD, or 1171-OP). The 1771-ID16K is compatible with the 1171-A 1B/A4B or the input/output chassis. The 1771-ID16K has 17 indicators, and among them are 16 input status indicators which light up when the field load is applied to the field wiring arm. The active indicator will light up when initialized successfully. The 1771-ID16K is a chassis-based input module with a conformal-coating and 16 isolated channels. It serves as a distributor and a monitor. Its conformal coating provides layers of protection from humidity and contaminants. It has an input filter feature that controls voltage and this boosts the performance of the module and ameliorates its power quality. To install the 1771-ID16K, users should first remove the power from the I/O chassis backplane and wiring arm and then the slide the 1771-ID16K into the chassis while pressing firmly, the next step would be to switch the latch lock down and wire the 1771-ID16K by swinging the wiring arm on the front of it and then by making the connections in the direction of wiring. It is important to note that only one wire is allowed in one terminal. Using an auxiliary terminal is required when connecting to more than one wire.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.