GE / IP FANUC Series 90/30 In Stock
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
Other Available Revisions for the 1771-IXHR 1771-IXHR/-Ser G1771-IXHR/-Ser H1771-IXHR/-Ser I1771-IXHR/-Ser J1771-IXHR/-Ser K1771-IXHR/-Ser L1771-IXHR/-Ser A1771-IXHR/-Ser B1771-IXHR/-Ser C1771-IXHR/-Ser D1771-IXHR/-Ser E1771-IXHR/-Ser F1771-IXHR/-Series1771-IXHR/-Series A1771-IXHR/-Series B1771-IXHR/-Series C1771-IXHR/-Series D1771-IXHR/-Series E1771-IXHR/-Series F1771-IXHR/-Series G1771-IXHR/-Series H1771-IXHR/-Series I1771-IXHR/-Series J1771-IXHR/-Series K1771-IXHR/A1771-IXHR/B1771-IXHR/C1771-IXHR/D1771-IXHR/E1771-IXHR/F1771-IXHR/G1771-IXHR/H1771-IXHR/I1771-IXHR/J1771-IXHR/K1771-IXHR/L1771-IXHR/M1771-IXHR/N1771-IXHR/O1771-IXHR/P1771-IXHR/Q1771-IXHR/R1771-IXHR/S1771-IXHR/T1771-IXHR/U1771-IXHR/V1771-IXHR/W1771-IXHR/X1771-IXHR/Y1771-IXHR/Z
The 1771-IXHR Thermocouple Millivolt input module is a bidirectional communication module when working with the processor and it can work with any programmable controller from the PLC-3 and PLC-5 group of the Allen Bradley modules. The module requires considerable storage space as it would be storing write and read block data. The 1771-IXHR moves words of the input data from its memory and takes it to an allocated area in the processor’s data table. The processes are compiled within a singular scan and this same transfer can occur from the processor’s data table to the memory of the module which qualifies your module as a bi-directional module. There can be an expected delay of 25 milliseconds between transfers from the block.
This module can be installed on any slot of the I/O chassis and 2 modules of the same group may be installed. Except when utilizing one or a half slot addressing, do not to place the module within the same group as a discrete high density one. For noise prevention, connect away from modules with a high voltage. A wiring arm may be connected to the pivot bar on the location of the module once it has been slotted on the I/O chassis. Use only the plastic keying bands that come with the module on shipment and keying would be done between 20 and 22 or 24 and 26. These positions may be changed should the need arise and you make use of some needle-nose pliers for the switching. This 1771 IXHR module may be used to replace the 1771 HE module within the same slots on the chassis.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.