GE / IP FANUC Series 90/30 In Stock
SKU 2174304 UPC 0799705797628
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The Allen-Bradley 1771-M1 is a stepper motor controller module. It forms a very important part of the 1771-QA stepper motor positioning assembly. The module draws a current of 1750 milliamperes at 5 Volts direct current from the backplane. The module is powered from the input-output chassis where it occupies a single slot. The 1771-M1 stepper motor controller module controls a maximum of three pulse output modules per axis.
If more pulse output expander modules need to be used in the system, then a maximum of three axes can be added modularly by adding to the output an additional two expander modules along the input-output chassis. The pulse output expander modules occupy a random slot in the I/O chassis but never the leftmost slot which is commonly reserved for the processor. The module is keyed using bands between pins 2 and 4 and pins 8 and 10. The 1771-M1 module operates optimally in environments with a temperature ranging from 0 to 60 degrees Celsius. The modules have a relative humidity rating of between 5 and 95% without condensation and stored at temperatures not exceeding 85 degrees Celsius and a minimum storage temperature of -40 degrees Celsius. The 1771-M1 stepper motor positioning assemblies use a data highway or a remote input-output channel when the 1771-M1 has to be located at different locations around the factory or plant. The 1771-QA provides LED indicators which are used to show and address conflict when more than one 1771-M1 is used in the same chassis and when the 1771-M1 and the 1771-OJ fail to communicate.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.