GE / IP FANUC Series 90/30 In Stock
SKU 2173016 UPC 0799705797444
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The Allen-Bradley 1771-OA is an AC output module with 8 outputs. The module occupies a single slot in the Input/Output chassis and it has a voltage range (output) of between 92 and 138 Volts AC at 47 to 63 Hertz. The output current rating for the 1771-OA module is 1.5 Amps per output module and it is a maximum of 6 Amps per module. The module’s maximum surge current is 4 Amps per output at 120 Volts AC for a period of 8.3 milliseconds (at 1-second repetition), a minimum load current of 50 milliamps/output at 120 Volts at 60 Hertz.
The on-state voltage drop for the 1771-OA module is rated at 2 Volts at 100 milliamperes and a maximum off-state leakage current of 5 milliamps/output at 120 Volts AC. The 1771-OA has an off-on signal delay of 1 milliseconds and an on-off delay of 8.3 milliseconds at 60 Hertz. The 1771-OA AC output module draws a current (from the backplane) of 210 milliamperes at 5 Volts DC, +/-5 percent. The power dissipation rating for the module is at 10.7W (maximum) and it is a minimum of 1.1W, its thermal dissipation rating is a maximum and minimum of 36.6 and 3.4 BTU per hour, respectively.
The 1771-OA module uses the 1771-WA field wiring arm which has a wiring screw torque of 7 to 9 pounds on an inch. Additionally, the 1771-OA uses keying pins between 4 and 6 and 12 and 14 and uses a fuse rated 2 Amps, 250 Volts. For monitoring and troubleshooting, the 1771-OA module has 9 LED indicators (one for each output channel and one to cater for the blown fuse). A single 1771-OA output channel can be used to drive a motor starter (max. size 4) when the supply voltage is greater than or equal to 92 Volts.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.