World's Largest Warehouse of
GE 90-30, Genius, and RX7i

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i




Rated 4.5/5 Based on 7 ratings.

Rate your purchase of the 1771-OC

Allen Bradley | PLC-5 | 1771-OC | Image

Allen Bradley | PLC-5 | 1771-OC | Image Allen Bradley | PLC-5 | 1771-OC | Image

SKU 2171130  UPC 0799705797352

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

Allen Bradley products are now sold by our affiliate company

Notice: By clicking this link, you will be redirected away from to


The 1771-OC is a DC output driver module from Allen Bradley. The module is recommended to be used in industrial environments with a degree 2 pollution. Its over voltage specifications fall under category I as defined by the IEC (publication 60664-1) at a non derating altitude of 2000 meters (maximum). The 1771-OC can be used to control the on/off status of; DC motor starters, solenoids, and indicators. The module has 8 outputs, a max. on-state voltage drop of 2 Volts DC, and occupies a slot in the 1771 Input Output chassis. The maximum and minimum power dissipation rating for the 1771-OC module is 16.9 and 0.9 Watts respectively. It also has a 10 Watts power dissipation rating for adjacent slot.

The 1771-OC DC output driver module has minimum thermal dissipation rating of 3 BTU per hour and a maximum of 57.6 BTU per hour. At 5 Volts DC, the module exerts a current load of 165 milliamperes on the backplane. The 1771-OC module, has a user output voltage that ranges from 42 to 50 Volts DC, an output current rating of 1.5 amperes per output, and a maximum surge current of 4 Amperes repeated each 1 second for 1 milliseconds. The module leaks 5 milliamperes per output at 120 Volts AC. The opto-electrical isolation for the 1771-OC module is 1000 Volts AC tested for 60 seconds. Additionally, the 1771-OC module uses the 1771-WA field wiring arm, 2A, 250 Volt fuses, and a wire size of 2.5 to 0.25 millimeters squared copper wire with a temperature rating greater than 75 degrees Celsius. When in operation, the module can withstand a shock of 30g and a vibration of 2 g at 10 to 500 Hertz. The 1771-OC module is powered through the backplane.

All online orders placed before 4:30 PM EST “SHIPS SAME DAY FREE!" World’s largest warehouse of Factory Sealed GE 90-30 PLC, GENIUS I/O and RX7i PACSystem.highlight_off

PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.