GE / IP FANUC Series 90/30 In Stock
SKU 2170028 UPC 0799705806269
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The Allen Bradley / Rockwell automation, 1771-OJC is a pulse output expander module that is compatible with the PLC-5 system. The 1771-OJC is used in a stepper module positioning assembly (1771-QA) where it provides for a programmable way to control the stepper motor. The module allows the extension of the axis in the Input Output chassis from one to a maximum of three axis. The operating voltage range for the 1771-OJC module is 0.8 to 1.0 Volts DC and it exerts a current load of 800 milliamperes at 5 Volts DC on the backplane. the E-Stop and JUG input modes for the module have an input signal delay of 250 milliseconds and 120 milliseconds (1 to 3 axis) respectively. For the external power source, the 1771-OJC module uses one that is rated 5 to 30 Volts DC with a maximum current rating of 340 milliseconds.
The peak to peak ripple rating for the external power source should not exceed that of the stepper translator which is calibrated during manufacture. To interface the module with open collector logic modules, the module has a 1600 Ohms pull resistors which is pre-installed at the factory. The duty cycle pulse for the 1771-OJC is 50 percent and a maximum signal rise that lasts for 0.6 microseconds at a current of 100 milliamperes. For maximum performance of the 1771-OJC module, it should be operated within temperatures not exceeding 60 degrees Celsius and not less than 0 degrees Celsius, and a non-condensing temperature of 5 to 95 percent.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.