GE / IP FANUC Series 90/30 In Stock
The Allen-Bradley 1771-WE PLC-5 field thermocouple wiring arm is a high-current thermal type of supplementary part made from thermoplastic that is suitable for industrial use. This wiring arm supports up to 8 I/O points and 18 terminals with gold contact plating. Conformal coating provides additional protection, making this wiring arm perfect for heavy-duty use. The 1771-WE wiring arm can operate without using external sources of power. According to the specifications of the unit, the typical AC signal delay (off) of the wiring arm is 29 milliseconds and typical DC signal delay (off) is 30 milliseconds, though the delay tolerates variations of between +/-7 and +/-8 milliseconds. The digital module for which the wiring arm is used is powered through the backplane of the chassis. Usually, the 1771-WE PLC-5 field wiring arm comes with other shipped parts for most of the modules of this type but it could also be purchased separately if necessary.
The Allen-Bradley wiring arms increase the provided flexibility of the system due to the unique interconnection between plant wirings and modules, further simplifying the operation. When installing the arm, the users need to make sure it is attached to the pivot bar located at the bottom of the I/O chassis. This makes installing and removing the module even easier since there is no need to disconnect the wires. The 1771-WE wiring arm weighs 100 grams (0.2 pounds) and its approximate dimensions are 114.3 millimeters (4.5 inches) x 314.9 millimeters (12.4 inches) x 160 millimeters (6.3 inches). The 1771 digital I/O DC input and output modules can withstand high temperatures so they can operate in a temperature range of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit) and they can be stored at temperatures ranging between -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit). The acceptable humidity levels for these modules range from 5 to 95% (non-condensing).
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.