GE / IP FANUC Series 90/30 In Stock
SKU 2173268 UPC 0799705808133
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The 1771-WI is a PLC-5 Thermocouple wiring arm manufactured by Allen-Bradley. This is a hardware component, which has eighteen terminals, is shipped with the high-resolution thermocouple I/O modules/millivolt, and it is located on the bottom of the 1771 I/O chassis. These terminals offer connection points for the inputs and outputs of the modules that are connected to it. This module features a maximum I/O connection capacity of 8 modules. The 1771-WI gives easy and convenient linkage between chassis wiring and the high-resolution thermocouple I/O modules. It uses a 14-gauge stranded wire size with 3/64 inches thick insulation. These act as base conductors and it features a gold conformal coating.
The 1771-WI is used in high-resolution thermocouple applications and it is not fused. Its optimum field-arm screw torque is 7 by 9 pounds on an inch and its weight is approximately 0.3 pounds or 0.1 kilograms. Wiring arms usually provide an easy and flexible interconnection between plant wiring and 1771 I/O modules. The integral I/O chassis clamp offers a swing-away operation that facilitates easy module access. An integral module-locking tab aids in ensuring connection integrity. Constructed of an industrial-grade thermoplastic, each wiring arm consists of one connection point for each required input or output to the module and any needed ancillary connection points for line or signal input. Incoming wires may be clamped directly or spade-lugged to the arm. The 1771-WI provides fuse protection for each output of a module and this eases fuse replacement without a module removal from the chassis. During installation, users can replace fuses by removing individual fuse holders without the removal of the output module.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.