GE / IP FANUC Series 90/30 In Stock
Notice: By clicking this link, you will be redirected away from PDFsupply.com to DOsupply.com
The 1772-LN2 is a microprocessor-based programmable controller that is designed for use in industrial applications. Created by Allen-Bradley, this module is adaptable both in terms of size and configuration. It is capable of monitoring and controlling over 128 I/O devices; with a central control unit plus several user-selected input and output modules, the 1772-LN2 is designed to meet all application demands. As an extremely flexible device the 1772-LN2 controller allows the user to select preferred modules and assemble a mini-PLC-2 controller that best suits any specific industrial requirements. Note that the selected I/O modules, together with the assembled Mini-processor unit, are all housed in a one Chassis. During operation, the 1772-LN2 continuously monitors the signal status of each input device, as well as an output device and the user program. Since the memory is programmable it can be readily modified whenever necessary. In addition, the PLC-2 processor can perform numerous functions, including block transfers, timing or counting, data comparisons, input/output forcing, arithmetic operations, and RS-232C or data highway interfacing.
With online data change, report generation, data highway interface, online programming, and selectable timed interrupt capabilities, the Allen-Bradley PLC-2 controller can serve as an incredible industrial application device. The volume of information that is transferable between the drive and the 1772-LN2 controller is usually determined by the prevailing DIP switch settings, which are often displayed on the Communication Module. Note that 1305 drives featuring firmware revisions, such as FRN1.01 and FRN1.02, aren’t configurable with Bulletin 1203 modules, so they should not be used together, as this may lead to message errors. The user should carefully study the provided guidelines before installing or operating this Mini PLC-2 microprocessor. When an error occurs, the red LED fault status, as well as the amber SCANport status present on the module’s front side, will flash simultaneously. Always make sure that the right connections are made to avoid such faults.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.