GE / IP FANUC Series 90/30 In Stock
The PLC-5-25 Classic PLC-5 Processor by Allen-Bradley is a standard processor module for the PLC-5 programmable controller system, which is used in a centralized and distribution system control. This processor is installed on the leftmost slot of the 1771 I/O chassis, and it is designed with 13 Kilo words of program memory which can be expanded to 17 to 21 Kilo words, and which supports an external EEPROM-based module for additional backup of data. This processor has an I/O connection capacity of 1024, with support for a maximum of 28 I/O chassis connection and 7 I/O rack connections, and it is programmed using the Ladder-logic and Sequential Function Chart (SFC) machine programming languages. The PLC-5-25 is located on a single leftmost I/O slot, and it draws 2.5 Amps backplane current at 5 Volts DC from the I/O Chassis. The PLC-5-25 can complete a discrete data scan for 1 millisecond over I/O rack connections, and it uses a maximum of 10 milliseconds to complete a remote I/O scan at 57.6 kilobits per second transmission speed.
This processor has an internal clock and calendar features, which has a timing accuracy of 1 program per scan, and this processor can be configured for use as a remote I/O scanner/adapter. It supports external 3.6 Volt battery modules, and it is compatible with 1771 I/O points modules. The PLC-5-25 uses the 2-slot addressing configuration for addressing any mixture of 1771 8-points I/O, and any pairs of 16-point I/O modules, and it also supports the 1 slot and ½ hardware addressing configuration. The PLC-5-25 has 1 communication port used for both the adapter and remote I/O scanner modes, and it communicates via the Allen-Bradley Data Highway Plus Link. It is built to operate at 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit) temperature range at 5 to 95% non-condensing relative humidity condition, and it is stored at -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit). The PLC-5-25 weighs about 1.34 Kilograms (without an enclosure), and it is CE, C-TICK, UL, and CSA certified.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.