GE / IP FANUC Series 90/30 In Stock
SKU 2177328 UPC 0799705793682
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The Allen-Bradley 1746-P3 is a power supply that dissipates 24V DC. It accommodates a voltage range (input) of between 19.2V and 28.8 V AC. The 1746-P3 has a current capacity of 3.6 amperes at 5V DC and 0.87 amperes at 24V DC. The power supply has a maximum inrush current of 20 amperes, and a minimum operating temperature rating of 0 degrees Celsius and a maximum one of 60 degrees Celsius. The 1746-P3 power supply must be operated in environments that have a relative humidity of 5-95% without condensation.
When wiring the 1746-P3 power supply, use two 14AWG wires per terminal. The 1746-P3 measures 5.5 x 2.9 x 5.7 inches and it weighs 2.5lb. The 1746-P3 power supply module has a 5% current capacity deration when operated at temperatures above 55 degrees Celsius. The output loading of the 1746-P3 changes when the power dissipation changes. The power supply is fused to protect against hazards that may occur due to short circuits. Transient faults are not accommodated by the fuse on the 1746-P3 power supply. The 1746-P3 is recommended to be used in industrial environments with a level two pollution rating.
When handling the 1746-P3, be extra careful not to cause an electric arc. The arc results when you operate loads (discharge, insert, connect or disconnect the power supply) without first switching off the 1746-P3 power supply. An electric arc is likely to cause detrimental conditions like explosions, which can injure personnel and damage other devices and modules. The 1746-P3 is used together with a replaceable terminal block which makes replacing loads or the 1746-P3 power supply easier.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.