GE / IP FANUC Series 90/30 In Stock
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
Other Available Revisions for the 1746-SIM 1746-SIM/A
The Allen-Bradley 1746-SIM is an input simulator module. It is recommended for use on sourcing and sinking modules that have 16 channels and a voltage of 24V DC with replaceable terminal blocks. To simulate the inputs in an SLC 500 system, the 1746-SIM has 16 switches. The module performs optimally when used with the 1746-IN16, 1746-ITV16, 1746-IV16, 1746-ITB16 and 1746-IB16 modules. The effects of using the 1746-SIM input simulator with other modules are not tested and may therefore damage the module, damage other devices in the system, or harm personnel.
The 1746-SIM is rated to be used in environments with a non-condensing humidity that ranges from 5 to 95%. The module must be stored in environments with a minimum temperature of -40 degrees Celsius and a maximum of 85 degrees Celsius. The 1746-SIM can operate within temperatures not exceeding 60 degrees Celsius and not less than 0 degrees Celsius. The 1746-SIM has a vibration (operating) rating of 2g at between 10 and 500 Hz.
The module is certified to be used in environments that are not hazardous and which are specified in Group A, B, C, D, and Class I, Division 2 ratings. The 1746-SIM is a low-voltage input simulator module that is tested to ensure that it conforms to the EEC (73/23) standards. The 1746-SIM is powered through a 24V power supply which is connected to Terminals A and B on the module. The 1746-SIM is installed in the Input/Output chassis where it occupies a single slot. The module uses a removable terminal block to manage the wiring process when replacing the input simulator.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.