GE / IP FANUC Series 90/30 In Stock
SKU 2173447 UPC 0799705807662
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The Allen-Bradley SLC 504 (5/04) Modular Processors support the 1747-UIC, 1747-CP3, 1784-PKTX(D) and 1784-PCMK network interfaces. SLC 504 processors can have a memory of 16k, 32k or 64k words. The processors have a maximum of 4096 discrete inputs and outputs respectively. They are equipped with battery backed RAM, which preserves memory for up to thirty minutes during a battery disconnect, and a built-in real-time clock/calendar. SLC 504 processors support advanced instructions such as basic math, comparison, jump and subroutine, Indirect Addressing, messaging and FIFO/LIFO.
Prior to installing the SLC 504 processors, power the system off, then carefully insert the processor into the chassis slot 0. When performing any kind of installation, such as replacing the battery on an SLC 504 processor, ensure that the power is off. Always make sure that adequate steps are taken to prevent electrostatic damage to the processor since this can damage the memory. To test if communication with the processor is occurring, power it on, then connect either a 1747-CP3 cable or a 1747-UIC interface to channel 0 of the SLC 504 processor and then to the personal computer’s serial or USB port respectively. Otherwise, a 1784-PCMK or 1784-PKTX(D) interface can be used.
Channel 1 on an SLC 504 processor uses Data Highway Plus (DH+) Network to support simple communication between controllers and computers. This protocol can support a maximum of 64 devices. Actual DH+ communication takes place using the 3-pin connector while the 8-pin connector allows you to monitor the communication. Channel 1 also has a 57.6 Kbaud rate and 1 as its node address.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.