GE / IP FANUC Series 90/30 In Stock
SKU 2172300 UPC 0799705807679
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The Allen-Bradley SLC 505 (5/05) Modular Processors are a family of processors that support the 1747-UIC, 1747-CP3, and 10/100 Base-T Ethernet network interfaces. SLC 505 processors have a lithium battery which provides backup power for the RAM with an expected life of two years. The BATT LED status indicator alerts you when the battery voltage is lower than expected, at which time it will need to be replaced. SLC 505 processors have a limit of 3 chassis with 30 slots. They have a typical scan time of 0.9 ms/K and are programmed using RSLogix 500 programming software. Before performing servicing or maintenance, you may want to back up the processor memory. Flash EPROM can be used to backup processor memory for the SLC 505 processors. Channels 0 on SLC 505 processors are configured to have no parity and no handshaking. They are able to detect duplicates, perform CRC error check and typically they have a 19.2 kbps baud rate.
To install the SLC 505 processor, first ensure that system power is off, then fit the processor into the 0 slot of the chassis. Establishing communication with the processor involves powering it on, then connecting a 1747-CP3 cable to channel 0 of the processor and then to the serial port of a personal computer. Alternately, you may choose to connect the 1747-UIC interface to channel 0 of the processor and to the USB port on a personal computer. Another option is to use a 10/100 Base-T compatible cable to connect the personal computer Ethernet card and channel 1 of the processor to an Ethernet hub.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.