GE / IP FANUC Series 90/30 In Stock
PDF Supply Company, LLC is not an authorized distributor for GE Fanuc Emerson
The Accessories catalog for the GE Fanuc RSTi-EP and Fieldbus stations contains a variety of accessories and spare parts that are available to repair, upgrade, and customize the RSTi-EP and Fieldbus stations. Some of the Accessories that are available include swivel markers which are pivoting hol...
The Accessories catalog for the GE Fanuc RSTi-EP and Fieldbus stations contains a variety of accessories and spare parts that are available to repair, upgrade, and customize the RSTi-EP and Fieldbus stations. Some of the Accessories that are available include swivel markers which are pivoting holder devices for module markers, paper labels for the swivel markers that can be printed with laser printers, terminations kits which include 2 end brackets and 1 end plate, and HD plugs that are used for HD modules and that come in packs of 8. The replacement parts available from the Accessories catalog include base modules, electronic units, and plug-in units that can be used to replace the original corresponding parts of the RSTi-EP stations when they wear out.
The GE Fanuc Accessories devices allow the users to customize their RSTi-EP and Fieldbus stations to the exact needs of their applications and they help to make the RSTi-EP stations as easy as possible to use and to do maintenance work on. The markers are used to label the equipment and components and the swivel markers which are attached to the connector frame can be used to label all the channels and lines in the system in detail. The printable paper labels can be yellow or white. The brackets from the terminations kits are used to hold the RSTi-EP station securely in place when it is installed on its DIN Rail. One of the end brackets is installed next to the network adapter on the left side of the station, and the other end bracket is installed with the end plate on the right side of the station.
The GE Fanuc EP-8100 device is a swivel marker for RSTi-EP I/O modules. It connects to a frame on the module that it can rotate or swivel on, and it displays a paper label marker with information about the module. The paper label inside the swivel marker can be replaced when necessary.
The EP-8101 Paper Labels are designed as accessories for modules made by GE Fanuc. These labels come in 2 colors, white and yellow. They are suitable to use with a GE EP-8100 label marker device.
The GE EP-8150 Snap-In Module Marker is designed for labeling modules that are made by GE Fanuc. It comes in a set with 500 pieces. It is designed to be used with I/O modules.
The EP-8300 Base Connector Module is designed for I/O modules made by GE Fanuc. It comes in a pack with 5 connector modules. This connector module is used with standard GE Fanuc I/O modules.
The EP-8301 DIN Rail Termination Kit is designed for I/O modules made by GE Fanuc. It weighs about 51 grams. This kit is an accessory that is used to secure the control station with 2 end brackets and a cover plate.
The GE EP-8310 Empty Slot Module is a DIN Rail-mounted module for the modular RSTi-EP system. This module has an operating voltage range of 20.4 to 28.8 Volts DC and a maximum current consumption rating of 10 Amps. It is part of the GE Accessories catalog.
The EP-8360 HD-Plug for GE RSTi-EP HD Modules is an accessory connection plug for the EP-3368 High-Density module. This HD plug kit has an operating voltage range of 20.4 to 28.8 Volt DC and a maximum current consumption rating of 1.0 Amps.
The EP-8400 Plug Kit is a DIN Rail-installed accessory plug kit for the GE RSTi-EP I/O modules. The EP-8400 plug-in unit is supplied as an assembly accessory consisting of connector frames and some connectors. It also has 4 poles.
The GE EP-8631 base module is a base module for the RSTi-EP EP-7631 power-feed module for the input current path. It is part of the GE accessories series. The EP-7631 power feed module with its EP-8361 base module is used to refresh the system current paths as well as the isolated power supply.
The GE Fanuc IC200CBL605 Expansion Cable is a single-ended RJ-45 to RS-484 inter-rack expansion cable for the Versamax Isolated Expansion Receiver Module. This cable has a maximum expansion cable length of 5.0 meters and an RJ45 connector. It is part of the GE Accessories catalog.
The GE Fanuc IC200CBL635 Siemens S7-2000 RS-485 Communication Cable is an RS-485 communication cable made for GE industrial automation architecture. It is part of the accessories catalog. The IC200CBL635 Cable has a 9-pin D type connector on one end of the cable for connecting to a Siemens S7-2000 controller.
The GE Fanuc IC200CBL655 Mitsubishi Fx 25-pin expansion cable is an RS-422 communication cable for the GE Fanuc DataPanel 45/65/85 (DP150, 160, 240E) operator interface modules. It is available from the accessories catalog. The IC200CBL655 cable has a 25-pin D-type connector on one end of the cable for connecting to a Mitsubishi Fx controller.
PDF Supply Company, LLC. sells surplus and refurbished products, which are sourced through independent channels. All warranties and support, if applicable, are with PDF Supply Company, LLC. and not the manufacturer; manufacturer warranties do not apply. PDF Supply Company, LLC. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturers on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. PDF Supply Company, LLC. does not sell or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.