1-919-535-3180 | 1-800-360-6802
sales@pdfsupply.com

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-919-535-3180

1-800-360-6802

Mon-Fri 8AM-5PM EST

sales@pdfsupply.com

GE Fanuc Emerson | Analog Inputs

GE Fanuc Emerson | Analog Inputs | Image click here to request a quote

The Analog Inputs from GE Fanuc are industrial analog input modules that are made to work with PLCs or programmable logic controllers in industrial applications. The Analog Inputs can operate with voltage or with current and they can support 2-wire, 3-wire, or 4-wire connections. These input modu...

The Analog Inputs from GE Fanuc are industrial analog input modules that are made to work with PLCs or programmable logic controllers in industrial applications. The Analog Inputs can operate with voltage or with current and they can support 2-wire, 3-wire, or 4-wire connections. These input modules can be configured to meet the needs of specific applications in the PLC system. Their features can be enabled or disabled as needed, and the voltage and current values can be changed as needed. Most of the Analog Inputs are disabled by default, but they can be easily configured and activated by the users to suit the needs of their systems and applications. Some of the Analog Inputs are made specifically to handle diagnostics applications.

 

The GE Fanuc Analog Inputs are primarily used to record data from multiple analog sensors with resolutions of up to 16 bits per input channel. They can support 4 channels or 8 channels at a time. Each input channel is equipped with a status indicator LED to give the users updates about the status of the channel, and each channel is protected against overcurrent and voltage surges of less than +/-30 Volts. Note that voltages which exceed +/-30 Volts can severely damage or even destroy the Analog Inputs. The Analog Inputs will protect themselves from overcurrent by switching temporarily to the voltage operating mode when overcurrent situations occur.  The Analog Inputs are active I/O modules, just like the Analog Outputs, the Digital Inputs, and the Digital Outputs, and up to 64 active I/O modules like these can be installed in 1 GE Fanuc RSTi-EP system at a time.


Read More >
EP-1813

The EP-1813 module is an 8-channel, 16-Bytes input power measurement module from the GE Fanuc Intelligent Platforms. It is part of the Analog Inputs series. It is used to monitor and calculate vital data for the regulation of electrical power systems in power grids.


Buy Now
EP-3164

The EP-3164 module is an analog input module from GE Fanuc that has 4 input channels and 16 bits of resolution per channel. It requires 24 Volts DC (+20% to -15%) supply voltage that is delivered via the system bus. The conversion time is 1 millisecond.


Buy Now
EP-3264

The EP-3264 module is an analog input module available with 4 input channels and 16-bit resolution per channel. This module is manufactured by GE Fanuc. It offers both module and channel diagnostic functionalities.


Buy Now
EP-3368

The EP-3368 module is a 16-bit analog input module from GE used in combination with the PACSystems RSTi-EP I/O devices. It has 8 input channels, 16 bits of resolution, and an accuracy of 0.1% FSR. It requires an HD connector known as the EP-8360 connector to operate.


Buy Now
EP-3468

The General Electric EP-3468 Analog Input Module is an 8-channel, 16-bits analog input module from the GE modular RSTi system. This module comes with 8 non-isolated inputs. It can detect 0 to 20 milliamps or 4 to 20 milliamps rated signal level.


Buy Now
EP-3664

The EP-3664 Analog Input Module is a 4-channel voltage/current analog input module from the GE Fanuc RSTi-EP I/O module system. It supports 2-wire, 3-wire, and 4-wire connection configurations. This module offers four 16-bits analog inputs that accept voltage or current signal levels.


Buy Now
EP-3704

The EP-3704 Analog Input Module is a 4-channel analog thermocouple module from the GE RSTi-EP I/O module system. This module offers 4 non-isolated temperature resistance inputs. Each input comes with 16 bits of resolution.


Buy Now
EP-3804

The EP-3804 Analog Input Module is a DIN Rail-mounted, 4-channel analog thermocouple module from the RSTi-EP Remote I/O family. It has been manufactured by GE Fanuc. This module offers 4 non-isolated thermocouple inputs with 16-bits resolution per channel.


Buy Now

PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.