1-919-535-3180 | 1-800-360-6802

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

Mon-Fri 8AM-5PM EST



Rated 4.4/5 Based on 10 ratings.

Rate your purchase of the EP-1214

All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to in indicate any affiliation with or authorization by any rights holder.

PDF Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with PDF Supply's 1-year, 2-year, or 3-year warranty.

Technical Specifications for EP-1214

BrandGE Fanuc
SeriesDigital Inputs
Part NumberEP-1214
Product TypeInput Module
MountingDIN Rail
Status LEDsYes
Dimensions120 x 76 x 11.5 milimeters
Weight87 grams
Input Delay0 to 40 milliseconds
Operating Temperature -20 to 60 degrees Celsius
Storage Temperature-40 to 85 degrees Celsius
Humidity5 to 95%

The GE Fanuc EP-1214 module is a digital input module. It has 4 input channels. The EP-1214 input module is designed for use with the GE RSTi-EP systems.

The GE Fanuc EP-1214 input module is a digital input module. It is compatible with GE RSTi-EP digital systems. The module is fully compliant with the IEC 61131-2 standards. The wiring connectors are color-coded for easy wiring. A green module status LED indicates communication with the system bus. There are also yellow LEDs for each input that indicate whether the inputs are active or inactive. The EP-1214 module is designed for mounting on a horizontally positioned industrial DIN Rail. Additional features available on the EP-1214 module include positive logic, time stamps, and support for hot insertion and removal. There are 4 digital inputs on the EP-1214 module. The inputs are rated for 24 Volts DC positive logic voltage. The inputs support 2, 3, or 4-wire connections. The input filter delay time is adjustable from 0 to 40 milliseconds.


The sensor supply current for the GE Fanuc EP-1214 input module is a maximum of 2 Amps per plug or a total of 8 Amps. The rated current consumption from the input current path is 18 milliamps. General specifications for the EP-1214 module include a -20 to 60 degrees Celsius operating temperature range, a -40 to 85 degrees Celsius storage temperature range, and 5 to 95% relative ambient humidity for operation and storage. The dimensions for the EP-1214 module are a width of 11.5 millimeters, a depth of 76 millimeters, and a height of 120 millimeters. The approximate weight of the input module is 87 grams. When the module is installed in hazardous areas, the power should be turned off before it is replaced or wired, even though it supports hot swapping in non-hazardous environments. Only qualified technicians should be involved in the module installation process.

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

PDF Supply sells used surplus products. PDF Supply is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by PDF Supply come with PDF Supply’s 1-year, 2-year, or 3-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. PDF Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because PDF Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, PDF Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. PDF Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. PDF Supply also makes no representations as to your right to install any such firmware on the product. PDF Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.