GE / IP FANUC Series 90/30 In Stock
Other Available Revisions for the IC670ALG230 IC670ALG230AIC670ALG230BIC670ALG230CIC670ALG230DIC670ALG230EIC670ALG230FIC670ALG230GIC670ALG230HIC670ALG230IIC670ALG230JIC670ALG230KIC670ALG230LIC670ALG230MIC670ALG230NIC670ALG230OIC670ALG230PIC670ALG230QIC670ALG230RIC670ALG230SIC670ALG230TIC670ALG230UIC670ALG230VIC670ALG230WIC670ALG230XIC670ALG230YIC670ALG230Z
Analog Input Current 8 Channel Module ALG230 GE Fanuc Field Control IC670A IC670AL IC670ALG
The GE Fanuc IC670ALG230 analog current source input module is an 8-point analog current input module from the Genius Field Control I/O module series. The GE Fanuc Genius Field Control system offers a cost-effective I/O control solution that covers a wide range of control architecture. A typical Genius Field Control station consists of a Bus interface module which provides intelligent processing, I/O scanning, and configuration, and a group of I/O module, and a terminal block which provide a base for all the field-side wiring. The IC670ALG230 analog current source input module, like every Genius Field Control I/O module, can be configured from the Bus Interface Unit or BIU by using a compatible handheld monitor, or the configuration parameters can be written or read via the bus in applications that support bus-level configuration.
The IC670ALG230 analog current source input module has 8 current-source type inputs that are grouped, and each input channel is capable of accepting a default 0 to 20 milliamps of current-level input signals. The current-level signal received by the IC670ALG230 analog current source input module is converted to 12-bit unscaled analog input data that is sent to the BIU, which performs scaling on the data and then sends the scaled data to a host device. The IC670ALG230 analog current source input module can utilize the 24 Volts DC backplane power for current loops, but if point-to-point isolation is required, a separate power supply must be used. The IC670ALG230 analog current source input module is installed on a terminal block unit, which supports I/O module replacement without reconfiguring the field-wiring. It comes with a sturdy and compact aluminium housing, which provides a protective environmental enclosure. The IC670ALG230 analog current source input module has a front-panel LED indicator that shows the module’s diagnostic and operational statuses.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.