GE / IP FANUC Series 90/30 In Stock
Preowned
PDF Supply Company, LLC is not an authorized distributor for GE Fanuc Emerson
Other Available Revisions for the IC610CPU101 IC610CPU101AIC610CPU101BIC610CPU101CIC610CPU101DIC610CPU101EIC610CPU101FIC610CPU101GIC610CPU101HIC610CPU101IIC610CPU101JIC610CPU101KIC610CPU101LIC610CPU101MIC610CPU101NIC610CPU101OIC610CPU101PIC610CPU101QIC610CPU101RIC610CPU101-RRIC610CPU101SIC610CPU101TIC610CPU101UIC610CPU101VIC610CPU101WIC610CPU101XIC610CPU101YIC610CPU101Z
CPU with 700 Word expandable memory module 1.7K Central Processing Unit Series1 IC610CPU
The IC610CPU101 central processing unit is a GE Fanuc Series One central processing unit (CPU) that can be used with the Series One, Model E, Plus, and Plus 3.7K controllers or PLCs from the same series. This central processing unit has been manufactured and designed by GE Fanuc Automation. This CPU has a memory of 700 words that can be expanded to up to 1724 words. It also includes an EPROM unit, non-volatile storage, and a battery back-up for the memory with an approximate life of 2 to 5 years when operating. The GE Fanuc Automation IC610CPU101 Series One central processing unit has a typical scan rating of 0.5K programs depending on the controller and the other components that are included in it.
The GE Fanuc Automation IC610CPU101 Series One central processing unit receives instructions and according to the program that is installed and it sends commands to the PLC and the connected devices to perform specific tasks. Some of the applications that can be executed by this CPU and the whole PLC are data and shift register, sequencers, timers and counters, retentive coils, and special function coil applications. The GE Fanuc Automation IC610CPU101 Series One central processing unit is meant to be installed with the PLC and both can be mounted on a rack. The environment cannot be hotter than 60 degrees Celsius during operation and the humidity level must remain between 5 and 95 percent without condensation This CPU has a voltage rating of 115 to 230 Volts AC and a frequency of 47 to 63 Hertz. The maximum load supported by this environment is 30 Volts. It is recommended to pair this CPU with the programmer mounting assembly that is available in the same catalog to provide further protection to all the parts.
Common related search terms: BatteryBuy, Configuration, Datasheet, Dimension, Emerson, Fanuc, Firmware, GE, GE-Fanuc, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
PDF Supply Company, LLC. sells surplus and refurbished products, which are sourced through independent channels. All warranties and support, if applicable, are with PDF Supply Company, LLC. and not the manufacturer; manufacturer warranties do not apply. PDF Supply Company, LLC. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturers on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. PDF Supply Company, LLC. does not sell or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.