1-919-535-3180 | 1-800-360-6802

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i



Mon-Fri 8AM-5PM EST



Rated 4.5/5 Based on 8 ratings.

Rate your purchase of the IC610MDL153
IC610MDL153 GE 24Vdc Sink Output, 2Amp (4 points) IC610M IC610MD IC610MDL PDFsupply also repairs GE

SKU 2173003  UPC 0739108852302


MSRP $1995



Save $1,747

1 In Stock

✓  2 Year PDF Supply Warranty

*What is Remanufactured?

Repair Service


Save $1,822

5-10 Days

✓  2 Year PDF Supply Warranty

*What is Fast Repair?

GE 24Vdc Sink Output, 2Amp (4 points) Series One Module PLC MDL153 IC610MD IC610MDL15

Technical Information

The GE Fanuc IC610MDL153 output module is a sink output module. A total of 4 fused 24 Volts DC rated sink output circuits are available on the module. Each output circuit is rated at 2 Amps of current. The module outputs are referred to as sink outputs because when the output is energized, the current flows from the load into the field terminal for each circuit. Despite having 4 outputs, the IC610MDL153 module consumes 8 consecutive discreet references, of which 4 references are not available as “real world” outputs but which can be used as internal coils. Applications for the module include control of discrete loads including solenoids, indicator lights, and relay coils. A single LED is also provided on the IC610MDL153 output module to display the operational state of each of the outputs.


The wire size recommended by GE Fanuc for the IC610MDL153 output module is AWG 12 for a single wire and AWG 14 for 2 wires. The wiring from the field terminates on a terminal board that is provided for this purpose. The maximum output load is highly dependent on the ambient temperature: 4 circuits can be on at 50 degrees Celsius while sinking 2 Amps of current, but only 3 circuits can be on at 60 degrees Celsius while sinking 2 Amps of current. The recommended minimum and maximum operating voltages for the output circuits are 5 and 24 Volts DC. The peak voltage is 45 Volts DC. The peak leakage current is less than 0.4 milliamps at 40 Volts DC. A replaceable 5-Amps fuse is provided for each output on the IC610MDL153 output module. The power consumed by the module varies from 5 milliamps at 24 Volts DC to 12 milliamps at 9 Volts DC. The IC610MDL153 module weighs approximately 120 grams.

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.
All online orders placed before 4:30 PM EST “SHIPS SAME DAY FREE!" World’s largest warehouse of Factory Sealed GE 90-30 PLC, GENIUS I/O and RX7i PACSystem.highlight_off

PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.