GE / IP FANUC Series 90/30 In Stock
SKU 2171062 UPC 0499399019579
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
GE 115-230Vac Output Module (8 points) Series One Module PLC GE IC610MDL1 IC610MDL17
The GE Fanuc IC610MDL175 output module is an output module that is rated for 115 or 230 Volts AC. The weight of the IC610MDL175 output module is 180 grams. A total of 8 outputs are provided on the module and the outputs are divided equally into 2 groups. The output current per output circuit varies with the operating temperature. This means that 8 module outputs can be on at 25 degrees Celsius and each can source 1 Amp of current, 8 module outputs can be on at 50 degrees Celsius and each can source 0.5 Amps of current, 5 module outputs can be on at 60 degrees Celsius and each can source 0.5 Amps of current, and 3 module outputs can be on at 60 degrees Celsius and each can source 1 Amp of current.
The internal power consumption rating on the IC610MDL175 output module for each output circuit which is in the on state is 20 milliamps. The IC610MDL175 output module comes with 2 integrated 5-Amp fuses, one for each group of output circuits. The ranges of AC operating voltages and AC frequencies are 97 to 265 Volts AC and 47 to 63 Hertz, respectively. Depending on the ambient temperature, the maximum current per output point can go up to a maximum value of 1 Amp. At 220 Volts AC (60 Hertz), the rated peak leakage current is 1.2 milliamps and at 110 Volts AC (60 Hertz), the rated peak leakage current is 0.5 milliamps. At 1 Amp, the on-state voltage drop is 0.9 Volts, and at 0.5 Amps, the on-state voltage drop is 0.8 Volts. The load on the module outputs should not be less than 25 milliamps.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.