GE / IP FANUC Series 90/30 In Stock
Other Available Revisions for the IC600BF913 IC600BF913AIC600BF913BIC600BF913CIC600BF913DIC600BF913EIC600BF913FIC600BF913GIC600BF913HIC600BF913IIC600BF913JIC600BF913KIC600BF913LIC600BF913MIC600BF913NIC600BF913OIC600BF913PIC600BF913QIC600BF913RIC600BF913-RRIC600BF913SIC600BF913TIC600BF913UIC600BF913VIC600BF913WIC600BF913XIC600BF913YIC600BF913Z
10-50Vdc Sink Output Module BF913 GE Series Six Board with Face Plate IC600B IC600BF
The IC600BF913 Output Module is a DC sink type of output module from GE Fanuc. It provides an optically isolated interface between the I/O bus and field digital circuitry. This 10 to 50 Volts DC rated output module comes with 32 active outputs arranged in 4 equal groups. Some of the benefits and features of this module include its low cost per output point, reduced I/O rack space, the LEDs at each of the output points, and the module’s ability to hold the last state of the outputs in the event of a power failure. The IC600BF913 Output Module also comes with jumpers and a DIP switch. The maximum on/off response time of the module is 40 microseconds.
The IC600BF913 Output Module has a set of status indicator LEDs to display the status of each output. When an output is on, the corresponding LED illuminates. It is a sink type output module that holds the last commanded output states as long as the user power level remains the same. It has 5 Volts DC and 180 milliamps of rated power requirements. This module acts as a current sinking module and the current ratings are 250 milliamps at 0 to 50 degrees Celsius and 200 milliamps at 51 to 60 degrees Celsius. It can be installed in the GE Series Six CPU rack. The IC600BF913 DC Sink Output Module uses a CLP clamp terminal to use inductive loads with the module. If the power supplies share a common negative point, the loads can be connected to any voltage between +10 and 50 Volts. It can be used to interface a wide range of devices including lamp drives, small coils, current sink DC loads, and compact I/O systems.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.