1-919-535-3180 | 1-800-360-6802
sales@pdfsupply.com

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-919-535-3180

1-800-360-6802

Mon-Fri 8AM-5PM EST

sales@pdfsupply.com

IC600BF930

Rated 4.7/5 Based on 10 ratings.

Rate your purchase of the IC600BF930
IC600BF930 In Stock! 115Vac Protected Output Module (4 points) IC600B IC600BF PDFsupply also repairs

SKU 2177455  UPC 0713161371611

disclaimer

Preowned
PDF Supply Company, LLC is not an authorized distributor for GE Fanuc Emerson

Reman

$998

3 In Stock

✓  2 Year PDF Supply Warranty

*What is Remanufactured?

Repair Service

$698

Save $300

5-10 Days

✓  2 Year PDF Supply Warranty

*What is Fast Repair?

115Vac Protected Output Module (4 points) GE Series Six Board with Face Plate IC600B IC600BF

Technical Information

The IC600BF930 module is a protected output module made for programmable logic control or PLC systems. The module has 4 output points and it is manufactured by GE Fanuc. The module is part of GE Series Six and it has a voltage rating of 115 Volts AC. This output module is a model with a face plate. The IC600BF930 module is designed for rack installation and it requires a single spot in the rack. The IC600BF930 module has a continuous isolation voltage of 240 Volts DC or RMS AC with input frequency of 50 to 60 Hertz. The transient isolation voltage of the module is 1500 Volts DC for a duration of 1 second maximum (non-repetitive). The faceplate has dimensions of 317 x 30 millimeters (12.4 x 1.1 inches) while the circuit board dimensions are208 x 280 millimeters (8.1 x 11 inches). 

 

The IC600BF930 output module requires a 5 Volts DC rated power source from the rack with a current rating of 400 milliamps. The output leakage current is less than 4 milliamps in the off-state while the maximum output load current rating in the on-state is 4 Amps. The inrush current is 40 Amps for the duration of 33 milliseconds per point. The minimum resistive load is 35 milliamps while the minimum inductive load is 50 milliamps. The output voltage drop of the IC600BF930 module is 1.3 to 2.3 Volts at the rated load. The output delay for both the on and off states is a maximum of half a cycle. The available outputs are isolated and they come with their own source (H), output (O), and neutral (N) connections.

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.
All online orders placed before 4:30 PM EST “SHIPS SAME DAY FREE!" World’s largest warehouse of Factory Sealed GE 90-30 PLC, GENIUS I/O and RX7i PACSystem.highlight_off

PDF Supply Company, LLC. sells surplus and refurbished products, which are sourced through independent channels. All warranties and support, if applicable, are with PDF Supply Company, LLC. and not the manufacturer; manufacturer warranties do not apply. PDF Supply Company, LLC. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturers on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. PDF Supply Company, LLC. does not sell or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.