1-919-535-3180 | 1-800-360-6802

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i



Mon-Fri 8AM-5PM EST



Rated 4.5/5 Based on 7 ratings.

Rate your purchase of the IC600CB526
IC600CB526 In Stock! Expanded Logic Control Module IC600C IC600CB PDFsupply also repairs GE IP FANUC

SKU 2177155  UPC 0938342859034


MSRP $2995

"Best Value"

Surplus New


Save $1,532

1 In Stock

✓  3 Year PDF Supply Warranty

*What is Surplus New?



Save $2,020

3 In Stock

✓  2 Year PDF Supply Warranty

*What is Remanufactured?

Repair Service


Save $2,312

5-10 Days

✓  2 Year PDF Supply Warranty

*What is Fast Repair?

Expanded Logic Control Module CB526 GE Fanuc Series Six Module Board IC600C IC600CB

Technical Information

The IC600CB526 control module is an expanded logic control module manufactured as part of the GE Series Six product line. This module should be installed in one I/O slot in the Series Six Plus CPU rack, in the Series Six CPU rack, or in the High-Capacity CPU input and output rack. The GE Fanuc IC600CB526 expanded logic control module has power requirements of 1.5 Amps or 20 units of load at 5 Volts DC, and at 12 volts DC, it requires 300 milliamps or 12 units of load which is supplied by the rack power. It features a storage temperature range of 0 to 70 degrees Celsius and a 0 to 60 degrees Celsius operating temperature range. The module has a tolerable humidity range of 5 to 95 percent, non-condensing. It has port to port common isolation or port to Series Six common isolation with a transient of 1500 Volts AC and a frequency of 50 to 60 Hertz for 60 seconds at maximum which is non-repetitive.


Other specifications of the IC600CB526 module include noise and transient ratings of 240 Volts DC or RMS AC, and 50 to 60 Hertz of rated frequency. This module meets the NEMA, ICS, and ANSI immunity standards. This logic control module contains 2 serial ports that are independently configurable, with both ports supporting the RS-422 and RS-232 serial communication interfaces. Port 1 supports active as well as passive current loops rated at 20 milliamps. Both of the serial ports on the IC600CB526 expanded logic control module support the asynchronous serial communications with different data rates of up to 19.2 KB per second. It features DIP switches with options including data rates of 110 to 19.2 KB per second and a maximum of 4800 KB per second of current loop operation for Port 1.

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.
All online orders placed before 4:30 PM EST “SHIPS SAME DAY FREE!" World’s largest warehouse of Factory Sealed GE 90-30 PLC, GENIUS I/O and RX7i PACSystem.highlight_off

PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.