GE / IP FANUC Series 90/30 In Stock
PDF Electric and Supply is not an authorized distributor for GE Fanuc Emerson
Other Available Revisions for the IC630CPU301 IC630CPU301AIC630CPU301BIC630CPU301CIC630CPU301DIC630CPU301EIC630CPU301FIC630CPU301GIC630CPU301HIC630CPU301IIC630CPU301JIC630CPU301KIC630CPU301LIC630CPU301MIC630CPU301NIC630CPU301OIC630CPU301PIC630CPU301QIC630CPU301RIC630CPU301-RRIC630CPU301SIC630CPU301TIC630CPU301UIC630CPU301VIC630CPU301WIC630CPU301XIC630CPU301YIC630CPU301Z
CPU/Programmer Unit, 4K Words Modules Series Three PLC CPU IC630CPU3 IC630CPU30
The General Electric/GE Fanuc IC630CPU301 Series Three Central Processing Unit (CPU) is a 4K-word processor and programmer unit for the GE Series Three PLC System. The IC630CPU301 CPU contains the system’s microprocessor, which performs the logic, communication, and data processing functions for every Series Three PLC application. The IC630CPU301 CPU receives input data from the field devices connected to the control system and it makes a logical decision based on predefined and user-defined control parameters. The IC630CPU301 performs iterative scanning operations and each scanning time varies based on the size and complexity of the program that is being scanned. The Series Three I/O system consists of 1 to 3 base units that are connected to form a local I/O station made up of a CPU, a power supply, I/O modules, and a system interface module.
In the biggest configuration of the Series Three I/O system, there are 3 base units connected by an I/O expander cable, and the IC630MDL302 CPU is installed only on the primary base unit or wired for handheld operation using a 1.5-meter CPU connector cable. Standard applications for the CPU/programmer include entering new Ladder programs, editing existing Ladder programs, adjusting and monitoring the pre-set values of timers and counters, monitoring the coils and contact statuses, and start and stop program execution, and it can also be used to access connected peripheral devices such as a PROM writer, audio cassette, and printer. Another important use of the CPU/programmer module is for displaying error codes and diagnostics reports. The IC630MDL302 CPU comes with a built-in lithium battery, which is used for backing up information on the CMOS in the event of a power failure, and this battery can be accessed through a plastic covering at the bottom of the module.
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.