PDF Electric and Supply

1-800-360-6802
1-919-535-3180
sales@pdfsupply.com

IC660BBA023

Buy NowIC660BBA023
IC660BBA023
IC660BBA023 Wiring

Rated 4.6/5 based on 13 ratings.
  • IC660BBA023
  • IC660BBA023 Wiring

Product Description



The
IC660BBA023 is a thermocouple manufactured by GE Fanuc. IC660BBA023 has a power supply voltage of 18-56 VDC at 9W, 10% max ripple. The IC660BBA023 consists of a thermocouple input block with three isolated pairs of inputs. The system is configured with transformers to isolate power and optical couplers for appropriate signal isolation.

Factoring in sizing as an industrial utilization enhancer, the IC660BBA023 thermocouple has dimensions of 8.83” (22.44 cm) x 3.50” (8.89 cm) x 3.94” (10.00 cm). Weighing in at just 4 lbs. (1.8 kg), the unit is compact and suitable for many appropriate industrial requirements. Installation is easily facilitated with minimal impact on the operating units.

The IC660BBA023 block to block isolation is 1500 V for one minute, while the group to group isolation is at 300V. The IC660BBA023 block power supply system is designed with a power supply dropout time of 10mS minimum. Power system design facilitates the optimum power to weight ratio of the thermocouple, ensuring that operating power loads are kept to a minimum, while facilitating desired operating performance.

IC660BBA023 facilitates temperature change detection. IC660BBA023 has a voltage measurement of -25.0mV to +150 mV. Internal cold junction measurements of the IC660BBA023 facilitate an operating range of 0-60 C, while external cold junction measurement facilitates an operating range of -25.0C to +150.0C.

The IC660BBA023 input update time is a maximum of 3.0 seconds. System diagnostic configurations include Open Wire, Over Range, Under Range, High Alarm, Low Alarm, and Internal Fault. The IC660BBA023 circuit diagnostics are executed automatically for any active circuits in the system under assessment. During installation and system start up, systems can be configured to detect each of the aforementioned conditions. To a main system computer, these default configurations can be turned on or off, but with the IC660BBA023 connected handheld monitor, all faults will be reported. Inactive circuits will not be detected by the system.

The IC660BBA023 thermocouple can withstand storage temperatures of -40 C to 100C (-40F to +212F) and humidity of up to 95 non-condensing conditions. From a vibrational perspective, a rate of 5-10 HZ, 0.2” (5.08 mm) displacement, 10-200 Hz at 1 G vibration is allowed. 


Technical Specifications


Rated Voltage: 24/48 VDC 
# of Points: 6
Input Interface: J, K, T, E, B, R, S and N thermocouples 
Input measurement: Adjusted up to +/-100 deg C or F
Operating Voltage: 18 - 56 VDC
Points per Common:   3 groups of 2

 

GE Intelligent Platforms / GE Fanuc GE-IP Genius I/O

SKU 2172146  UPC 0799705798465

Part Number: IC660BBA023 / ic660bba023
Mfr/Brand Name: GE Automation
Mfr Number: IC660BBA023 / ic660bba023
Type: 24/48 volt DC Thermocouple Input Block, 6 channels

Technical Specifications

  • Internal fault detection
  • Open Wire detection
  • Input indication
  • Input alarms
  • 115 VAC/125 VDC
  • 24/48 VDC
Troubleshooting and Product Information for IC660BBA023

Download product information, troubleshooting guides and operation manuals to get your PLC operational.

New IC660BBA023
Price: $3,150
11 In Stock
1 Year PDF Supply Warranty

*Need a Specific Revision?

New Surplus IC660BBA023
Price: $2,450
5 In Stock
3 Year PDF Supply Warranty

*What is New Surplus?

Save
 23%
Reman IC660BBA023
Price: $1,095
3
In Stock

2 Year PDF Supply Warranty

*What is Remanufactured?

Save
 66%
Repair Your IC660BBA023
Price: $995
1 Year PDF Supply Warranty
Call For Assistance
1-800-360-6802

Other IC660BBA023

Available Revisions:

Confirm Your Revision Number

1C660BBA023 , GEFIC660BBA023 , CIMIC660BBA023

Specifications

Block Type:

Six thermocouple–compatible inputs, three isolated groups of two.

CatalogNumbers:

115 VAC / 125VDCThermocoupleBlock TerminalAssemblyOnly

Electronics Assembly Only

24 / 48 VDC ThermocoupleBlock TerminalAssemblyOnly Electronics Assembly Only

 

IC660BBA103 IC660TBA103 IC660EBA103

IC660BBA023 IC660TBA023 IC660EBA023

Size (Height x width x depth):

Weight:

LEDs (I/O Block): HeatDissipation:

8.83” (22.44cm) x 3.50” (8.89cm) x 3.94” (10.00cm)

4 lbs. (1.8 kg)

UnitOK,I / OEnabled 9Wmaximum

Block to Block Isolation: Group to GroupIsolation:

1500 V for one minute 300 V

115VAC/125 VDCblockpower:

Powersupplyvoltage

Power supply dropout time:

115 VAC 125 VDC

93–132  VAC @ 9W 105–145 VDC  @ 9W

47–63 Hz 10% max. ripple

1 cycle 10 mS

24/48 VDCblockpower:

Powersupplyvoltage Power supply dropout time

 

18–56 VDC @ 9W, 10% max. ripple 10mSminimum

InputCharacteristics:

Voltagemeasurement: Range

Resolution Accuracy  (at 25C)

Bandwidth of input amplifier filter Temperaturecoefficient

 

–25.0mV  to +150mV

Less than $ 4 V

Less than $ 10V error typ, 20Vmax. 8 Hz

$ 2V / C typical

Internal Cold Junction Measurement:

Range

Offset at 25C Linearity Resolution

Temperaturecoefficient

 

0  to 60C

2 C typ. User adjustable to zero at any temperature.

$ 0.15C

Less than $ 0.01C

$    0.05    per C

External Cold Junction Measurement:

Range

Scalefactors Resolution Accuracy

 

–25.0C   to   +150.0  C

1.0C per millivolt, 1.0K per microampere Less than 0.01  C

$ 0.1C

Input update time (all channels):

2.0 sec (typ), 3.0 sec (max)

Openwire detection response:

less than 5.0 seconds

Diagnostics:

Open Wire, Overrange, Underrange, High Alarm, Low Alarm, Internal Fault

Environmental:

Operating Temperature Storage Temperature Humidity

Vibration:

 

0C   to   +60C   (+32F   to  +140F)

–40C to +100 C   (–40F   to  +212F)

5% to 95% (non–condensing)

5–10 Hz 0.2” (5.08mm) displacement, 10–200 Hz at 1G

 

Troubleshooting IC660BBA023

Troubleshooting information is available on IC660BBA023's website page; it also includes a datasheet, user manual, and a wiring diagram.

Customer Questions and Answers


  • Question:  What is an IC660BBA023?  Answer:  The IC660BBA023 is a 24/48 VDC Thermocouple Input Block from the GE Fanuc Genius I/O Series. This block is primarily used for monitoring temperature with standard thermocouple types connected to the inputs. It can also be used for measuring low-level voltage input signals. 
  • Question:  What is the difference between IC660BBA023 and IC660BBA103?  Answer:  The only difference between these blocks is their power supply.
  • Question:  How many input circuits does IC660BBA023 have?  Answer:  This block has 6 input circuits. (They are in 3 separate groups.)
  • Question:  How much common mode voltage is allowed between 2 points in one group?  Answer:  +/- 10 V
  • Question:  What does each group have?  Answer:  Each group has 2 thermocouple input circuits and 2 remote cold junction compensation inputs.
  • Question:  What is the group to group isolation?  Answer:  300 volts
  • Question:  The configuration of each channel can be to use what?  Answer:  The configuration of each channel on IC660BBA023 can be to use an internal sensor, an external sensor, or an user-defined value for cold-junction compensation.
  • Question:  What diagnostic tests does IC660BBA023 perform?  Answer:
    • Internal fault detection
    • Open Wire detection
    • Over range and under range input indication
    • High and low input alarms
  • Question:  What should I do if my IC660BBA023 has failed?  Answer: Your IC660BBA023 may need repair

For more information on the IC660BBA023 Thermocouple Input Block of the GE Fanuc Genius I/O Series, please see the Datasheet User-Manual.

The final letter in the part number (ex. IC660BBA023K) indicates the revision. Revision K and later use the newer style electronic housing and therefore need the newer style plastic door and may indicate some compatibility issues with the terminal strip.

Need To Order A Specific Revision?

Give us a call at 1-800-360-6802 or 1-919-535-3180.

We can help you with your Revision specific needs.


Free Overnight delivery on orders over $500!

What is New Surplus?

These “New Surplus” units are a great cost saving alternative. This product is sealed in the original manufacturer’s packaging with all sub-assemblies and documentation. May indicate older date code. Comes with a PDF Supply 3-year warranty.


Free Overnight delivery on orders over $500!


What is Surplus New?

Surplus New - New unused and includes all sub-assemblies and documentation. Product may ship in manufacturer or PDF Supply packaging. May indicate older date code. Includes a PDF Supply 3 Year Warranty.


Free Overnight delivery on orders over $500!


What is Reconditioned?

Reconditioned products from PDF Supply are a cost-effective alternative to new and obsoleted PLC products. Every part is reconditioned down to the circuit board level and updated to the latest revision. All parts are thoroughly inspected and hand-cleaned before being functionally tested in a fully configured system.


Our Reconditioned Products always come with a PDF Supply 2-Year Warranty.

Free Overnight delivery on orders over $500!


What is a Verified Substitute?

A verified substitute new product is a "drop in" replacement designed with identical specifications as the OEM product. It will meet all electrical and dimensional charactertics at a substanstially reduced price.


Free Overnight delivery on orders over $500!


Download Lastest Documentation


Please visit this manufacturer's website to download the lastest manuals and datasheets.


Lowest Price Guarantee


We stand behind our prices with a lowest price guarantee. If you find a legacy GE PLC part advertised for less on an authorized GE PLC distributor website, simply contact us and send us a link to the lower advertised price. We will match that price and ship overnight FREE. The item must be in stock, in similar condition and be able to ship same day.

Free Shipping



FREE Overnight Delivery for Continental US orders over $500!

FREE Ground Delivery for Continental US orders under $500!

US orders placed Monday - Friday before 5pm EST will ship same day.

Canada/Mexico orders placed Monday - Friday before 3:30pm EST will ship same day.

International orders will ship the following business day.