GE / IP FANUC Series 90/30 In Stock
SKU 2172162 UPC 0799705794054
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The GE Intelligent Platforms/ GE Fanuc GE-IP Genius I/O IC660BBA025 is a block 24/48Vdc Analog Current Source with six outputs. This block features six 4 to 20 mA analog output circuits with no calibration required for operation. Software configurable, this block has advanced diagnostics and a dedicated bus switching module control. Outputs 5 and 6 can be used as voltage applications if needed.
The blocks provide power to all circuits, and no separate power is required for 4-20mA signals. Each output provides power and control of a 4 to 20mA current loop. IC660BBA025 is a block that has a dedicated digital output that can be used to drive a Bus Switching Module. Handheld monitor model IC66*HHM501G (version 4.0) or later is required for configuration.
When installing the GE Fanuc GE-IP Genius I/O IC660BBA025 know they are considered open equipment and must be installed with a protective enclosure in an area that is clean and free of airborne contaminants. Output channels use a dual 12-bit digital to analog converter and can independently control currents from 0mA to 24mA. The block’s advanced diagnostics provide messages. Fault messages can be cleared from the handheld monitor or CPU.
To configure the block, first use a handheld monitor and enter the device number (serial bus address). Then enter the reference number if required. The blocks configured scaling determines the corresponding output of the signal value. As an added precaution, if the block is configured offline, then it must be properly grounded and have a 75 Ohm resistor installed across Serial 1 and 2 terminals.
|Rated Voltage:||24/48 VDC|
|# of Points:||6|
|Output Range:||4 mA to 20 mA, 0 mA to 24 mA|
|Resolution:||6 micro Amp
|Operating Voltage:||18 - 56 VDC|
|Points per Common:||One group of 6|
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.