GE / IP FANUC Series 90/30 In Stock
SKU 2176411 UPC 0799705793545
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The GE Fanuc Genius IC660BBA026 is a 24/48 volt DC Current-Source Analog Input Block. IC660BBA026 block is typically used to interface a controller to devices that transmit signals in the range of 4 to 20mA. The IC660BBA026 block has six 4-to-20mA input circuits with isolated channels. Each input provides a 24 volt current loop power supply that generates up to 25mA of current. Six independent inputs are isolated from all the other circuits on the block. Input accuracy is 0.1%. Input conversion time is selected to provide the right combination of noise rejection and input resolution. The IC660BBA026 block has programmable conversion times that range from 16ms - 400ms. Resolution notably increases as the conversion time lengthens. Input resolution is 1µA for 200mS conversion time.
Each input circuit can have upper and lower alarm limits programmed. The block always indicates a fault if either limit exceeds and consequently sends a message to the handheld monitor and CPU. When installing the IC660BBA026 into a redundant bus cable system, use the block’s dedicated digital output to pair it with a 24/48 VDC Bus-Switching Module (BSM). BSM circuitry and two output channels share with each other but are isolated from block inputs.
To configure blocks software and protect configuration from accidental changes, a handheld monitor is used. If communication with the CPU is interrupted, the user may decide whether block output holds at its last state or reverts to default settings. The user can set values for circuit scaling, turn fault reporting on/off, and decide how output feedback errors are handled. IC660BBA026 and IC660BBA106 are similar in all aspects except IC660BBA106 uses a 115 VAC power supply.
|Rated Voltage:||24/48 VDC|
|# of Points:||6|
|Input Range:||4 mA to 20 mA, 0 mA to 25 mA|
|Resolution:||1 micro Amp
|Operating Voltage:||18 - 56 VDC|
|Points per Common:||6 Isolated points|
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.