GE / IP FANUC Series 90/30 In Stock
SKU 2170247 UPC 0799705793538
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
IC660BBA100 is an analog I/O Block from the GE Genius series. The block has a rated voltage of 115 VAC Voltage/Current. The IC660BBA100 block has four independent input circuits and two independent output circuits. This block is quite flexible, which allows compatibility with a wide variety of analog I/O devices. Each circuit on IC660BBA100 Block can either receive or deliver signals in any of these five analog ranges: -5 volts DC to +5 volts DC, -10 volts DC to +10 volts DC, 0-5 volts DC, or 4-20 mA/1-5 volts DC, 0-10 volts DC. The first four circuits on IC660BBA100 are inputs. The input circuits share one 12 bit analog to digital (A/D) converter. The block in-return converts each input signal current to a digital count value. It then translates the counted value to an integer that represents the engineering units for that particular input.
The other remaining two are output circuits served by a 12 bit digital to analog (D/A) converter. IC660BBA100 block then converts the engineering units output received from the processor to a digital count value. It then converts the counted value to an output signal voltage. Accuracy is within 50mV on the 10V range and 5mV on the 5V range and 100uA on the 4-20mA range. The block’s internal power supply conveniently drives the current mode outputting loads of up to 300 Ohms each. An external 24 or 48 VDC power supply is required for loads up to 2K Ohms.
Other IC660BBA100 features include the ability to independently scale for each individual input and output; the ability to either enable or disable fault reports to the host for each input and output; inputs that can function either in normal analog input mode, or report just its alarm status; low and high alarm limits for each input both in normal input mode and alarm input mode; power default values for both output; outputs that can consequently be configured to hold last state or default if communication from the processor is lost; and input Low Alarm and High Alarm detection. IC660BBA100 can be used alongside any handheld monitor. However, if using handheld monitor model IC66HHM501, the baud rate configuration must be changed or have redundancy features configured.
|Rated Voltage:||115 volts AC|
|# of Points:||4 Inputs / 2 Outputs|
|Input Range:||0-10 VDC, -10 to +10 VDC, -5 to +5 VDC, 0-5 VDC, 4-20 mA|
|Output Range:||0-10 VDC, -10 to +10 VDC, -5 to +5 VDC, 0-5 VDC, 4-20 mA|
|Operating Voltage:||98 - 132 VAC|
|Points per Common:||One group of 4 Inputs and one group of 2 Outputs|
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.