GE / IP FANUC Series 90/30 In Stock
Preowned
PDF Supply Company, LLC is not an authorized distributor for GE Fanuc Emerson
Other Available Revisions for the IC660BBA105 IC660BBA105AIC660BBA105BIC660BBA105CIC660BBA105-CAIC660BBA105DIC660BBA105EIC660BBA105FIC660BBA105HIC660BBA105KIC660BBA105LIC660BBA105MIC660BBA105NIC660BBA105-N1IC660BBA105-RR
Manufacturer | GE Fanuc |
---|---|
Series | Series 90-30 |
Part Number | IC660BBA105 |
Product Type | Analog Output Module |
Compatibility | GE Fanuc Series 90-30 PLCs |
Number of Outputs | 6 |
Power Supply Voltage | 115V AC, to 125V DC |
Output Range | 4 to 20 milliamps |
Block to Block Isolation | 1500 Volts for one minute |
Environmental Protection Rating | IP 20 |
The IC660BBA105 is a Current-source Analog 6 Output Block of GE Fanuc series 90-30 PLCs. It belongs to the Analog Output Modules group and can connect with either a 115 VAC or a 125 VDC power supply. A different version of the same equipment can be powered with 24/248VDC (IC660BBA025). It has six outputs whose output range is between 4 mA to 20 mA and provides the system with different types of diagnostics. Circuit power is isolated, and accuracy of input is as precise as 0.15% at 25C.
Isolated power is provided to outputs by the block’s power source, and no additional power supply is needed for current loops of 4 to 20 mA. Outputs are electrically all the same. The outputs convert digital signals of 12 bits to analog signals for 0mA to 24mA. Values display on the handheld screen as integers, individually for every output. The IC660BBA105 Current-source Analog 6 Output Block has a dedicated bus switching module output that connects to specific BSM devices.
The IC660BBA105 Current-source Analog 6 Output Block can be configured to hold the last output state, or a default state, and can receive output feedback and feedback time. The circuit transforms the signal to engineering values, and the block can work if there is CPU redundancy. This equipment also provides fault reporting that can be disabled if needed. Faults include output over-range and under-range signal detection and feedback recognition of less than 1.5 mA signals.
All Genius bus controllers are compatible with IC660BBA105 Current-source Analog 6 Output Block. To configure the block, the user needs a handheld monitor of version 3.7 or above. The programming software is Logicmaster 6 ver. 4.02 or later. CPUs that are compatible with the block are rev. 105 or later for Series Six PLCs, rev.110 and above for Series Six Plus, and rev. 3.0 or later for series 5 PLCs. If a bus switching module is required, IC660BSM021 is the only compatible option.
The IC660BBA105 Current-source Analog 6 Output Block has 32 terminals. Power source connects to terminals 6 and 7. Output cables connect to the self-powered inputs 11 to 32. Bus Switching Module connects to terminals 9-10.
Rated Voltage: | 115 VAC/ 125 VDC |
# of Points: | 6 |
Output Range: | 4 mA to 20 mA, 0 mA to 24 mA |
Resolution: | 6 micro Amp |
Operating Voltage: | 93-132 VAC / 105-145 VDC |
Points per Common: | One group of 6 |
The GE Fanuc IC660BBA105 Analog Current Output Module is a type of I/O module made for the GE Fanuc Series 90-30 PLCs that is designed and manufactured to send a current signal to 6 field devices such as transducers, valves, and other types of current-operated actuators. The GE Fanuc IC660BBA105 Analog Current Output Module needs a 115 Volts AC or 125 Volts DC rated power supply, and it offers the industrial users 6 current output loops that operate in the most popular current range between 4 and 20 milliamps. The small dimensions of the device include a height of 8.83 inches (22.44 centimeters), a width of 3.5 inches (8.89 centimeters), and a depth of 3.94 inches (10 centimeters) which, combined with its light weight of only 1.8 kilograms, make it an ideal solution for most crowded panelboard applications.
The GE Fanuc IC660BBA105 Analog Current Output Module has been designed for installation inside a protected panelboard, and its environmental protection rating by itself is only IP 20. The recommended operating temperature range spans between 0 and 60 degrees Celsius (32 and 140 degrees Fahrenheit). For higher or lower temperature extremes, climate control systems should be added to the panelboard that is hosting the PLC system. The GE Fanuc IC660BBA105 Analog Current Output Module can handle a maximum current of 250 milliamps and it comes from the factory with a block-to-block isolation of up to 1500 Volts for 1 minute. Many applications can be controlled by using this analog current module, so any GE Fanuc Series 90-30 PLC system application would benefit from this output module.
Block Type: CatalogNumbers: 115 VAC / 125VDCCurrent-source Analog Output block TerminalAssemblyOnly ElectronicsAssemblyOnly 24 / 48VDCCurrent-source Analog Output block TerminalAssemblyOnly ElectronicsAssemblyOnly |
6 Current–source Outputs IC660BBA105 IC660TBA105 IC660EBA105 IC660BBA025 IC666TBA025 IC666EBA025 |
Size, Height x Width x Depth: Weight: LED’s (I/O Block): BSMControl: |
8.83” (22.44cm) x 3.50” (8.89cm) x 3.94” (10.00cm) 4 lbs. (1.8 kg) UnitOK,I / OEnabled Switchesone 24 / 48 VDC BSM (IC660BSM021) |
Block to Block Isolation: |
1500 V for one minute |
HeatDissipation: |
12 Wattsmaximum |
115VAC blockpower: Powersupplyvoltage Maximumcurrent Frequency / ripple Power supply dropout time |
93–132 VAC 250mA 47–63 Hz 1 cycle |
125VDCblockpower: Powersupplyvoltage Maximumcurrent Frequency / ripple Power supply dropout time |
105–145 VDC 140mA 10% max. ripple 10mSmin. |
24/48 VDCblockpower: Powersupplyvoltage Maximumcurrent Ripple Power supply dropout time |
18–56 VDC 600mA 10% max. 10mSmin. |
OutputSignalCharacteristics: Accuracy at 25 C Resolution Updatefrequency Range Overrangecapacity Diagnostics Load
Thermal drift (from 25 C) |
0.15% of full–scale reading 6ïA 25mS < 4mA to 20mA 0mAto24mA Underrange, Overrange, Feedback error 0 ohms to 850 ohms (currentapplication) 0 to 10mA: 0 to 5–volt application 0 to 10mA: 0 to 20–volt (maximum) voltage application 35 PPM per C typical |
Environmental: Operating Temperature Storage Temperature Humidity Vibration |
0C to +60C (+32F to +140F) –40C to +100C (–40F to +212F) 5% to 95% (non–condensing) 5 – 10 Hz 0.2” (5.08mm) displacement, 10–200 Hz at 1G |
Troubleshooting IC660BBA105
Troubleshooting information is available on IC660BBA105's website page; it also includes a datasheet, a user manual, and a wiring diagram.
Repair your IC660BBA105
PDF Supply can repair your IC660BBA105 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
For more information on the IC660BBA105 Current-Source Analog Output Block of the GE Fanuc Genius I/O Series, please see the Datasheet User-Manual.
The final letter in the part number (ex. IC660BBA105K) indicates the revision. Revisions K and later use the newer style electronic housing and therefore need the newer style plastic door, and may indicate some compatibility issues with the terminal strip.
Common related search terms: ConfigurationDatasheet, Emerson, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
PDF Supply Company, LLC. sells surplus and refurbished products, which are sourced through independent channels. All warranties and support, if applicable, are with PDF Supply Company, LLC. and not the manufacturer; manufacturer warranties do not apply. PDF Supply Company, LLC. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturers on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. PDF Supply Company, LLC. does not sell or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.