GE / IP FANUC Series 90/30 In Stock
SKU 2174114 UPC 0799705793484
All product names, trademarks, brands and logos used on this site are the property of their respective owners. PDF Supply is not an authorized distributor, reseller or representative of the products featured on this website. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.
The "CA" Revision is for the PDF Supply Conformal Coating Service. PDF Supply warranty will apply. A $150 service charge will be added at checkout.
The IC660BBA106 is a Current-source Analog Input Block with six channels of GE Fanuc series 90-30 PLCs. The required power supply for this block is 115VAC or 125VDC. It has six current inputs of 4mA to 20mA. Each one provides a 24V current loop power supply with accuracy as precise as 0.1% and is isolated. It also has a BSM circuit electrically common to input 1 but is isolated from the others.
When power is provided to the block, input channels translate analog current to digital value as whole integers using voltage to frequency converters; after that, they send it to CPU. Input conversion time can be selected to provide the appropriate combination of noise rejection and input resolution. Conversion times are programmable from 16mS to 400mS. Resolution increases as the conversion time is lengthened. Input resolution is 1μA for 200mS conversion time. Upper and lower alarm limits can be programmed for each input circuit. If either limit is exceeded, the block indicates a fault and sends a message to the handheld mnitor, which is required for configuration and control of the IC660BBA106 Current-source Analog Input Block. In each bus scan, the block broadcasts 12 bytes of input data. Each input consists of two bytes of data.
The IC660BBA106 has 32 terminals. Power source connects to terminals 6 and 7. Input cables connect to the self-powered inputs 10 to 32. The bus switching module connects to terminals 8-9.
|Rated Voltage:||115 VAC/125 VDC|
|# of Points:||6|
|Input Range:||4 mA to 20 mA, 0 mA to 25 mA|
|Resolution:||1 micro Amp
|Operating Voltage:||93-132 VAC / 105-145 VDC|
|Points per Common:||6 Isolated points|
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.