GE / IP FANUC Series 90/30 In Stock
The IC660BBD023 is a 24 VDC Source I/O, 16 Circuit, 2/3 Wire Sensor Compatible Block of GE Fanuc series 90-30 PLCs. It is one of the discrete and analog blocks in this series. Its interface is electromechanical and has two or three wire solid state sensors. The block has 16 discrete circuits that can work as inputs, tristate inputs, or outputs. This block receives current from field output devices. The power source needed is 24/48 VDC.
Dimensions for IC660BBD023 are 22.4c.m. x 9.05cm x 11.23c.m. The block weighs 1.8kg. Its operating temperatures are from 0 to 60 degrees Celsius.
Rated Voltage: | 24 VDC |
# of Points: | 16 |
Input Range: | 18-30 VDC |
Load Current: | 2 Amp |
Operating Voltage: | 18-30 VDC |
Points per Common: | One group of 16 |
Block Type: CatalogNumbers: 24 / 48VDC16CircuitSourceI / OBlock Terminal Assemblyonly ElectronicsAssemblyonly 24VDC Source 16 Circuit Source I / O Block Terminal Assemblyonly ElectronicsAssemblyonly 24 / 48VDC16CircuitSinkI / OBlock Terminal Assemblyonly ElectronicsAssemblyonly 24VDC 16 Circuit Sink I / OBlock Terminal Assemblyonly ElectronicsAssemblyonly |
16 circuit discrete input and output |
IC660BBD020 |
|
IC660TSD020 |
|
IC660EBD020 (same as block IC660BBD022) |
|
IC660BBD022 |
|
IC660TBD022 |
|
IC660EBD020 (same as block IC660BBS020) |
|
IC660BBD021 |
|
IC660TSD021 |
|
IC660EBD021 (same as block IC660BBD023) |
|
IC660BBD023 |
|
IC660TBD023 |
|
IC660EBD021 (same as block IC660BBD021) |
|
Size (height x width x depth): |
8.83” (22.44cm) x 3.50” (8.89cm) x 3.94” (10.00cm) |
Weight: |
4 lbs. (1.8 kg) |
LEDS (block): |
Unit OK, I / OEnabled |
LEDs (each circuit): |
Individual load side indicators |
HeatDissipation: |
68.8 Watts with 16 outputs on at 2 amps. |
Block to Block Isolation: |
1500 V |
Operatingvoltage: |
18–56 VDC (24 / 48 V), 18–30 VDC (24 V) |
Ripple (maximum): |
10% |
Required DC power: |
150mAtypical / 300mAmaximum |
Power supply dropout time: |
10mS |
Input Characteristics: For standard input, voltage relative to (DC–) Input ON, 24 VDC supply 48 VDC supply* Input OFF, 24 VDC supply 48 VDC supply* Input processing time (typical) Input impedance (typical) Selectable input filter times Inputdiagnostics |
Source Blocks Sink Blocks |
16–24 VDC 0–8 VDC |
|
32–48 VDC * 0–16 VDC* |
|
0–7 VDC 17–24 VDC |
|
0–14 VDC* 34–48 VDC* |
|
5.6Kohms (24 / 48V), 1.8Kohms (24V) |
|
1.7mS (plus selectable filter delay) |
|
5–100mS |
|
Open wire, Overtemperature, Failed Switch |
|
OutputCharacteristics: Output current (steady state) |
2 amps per circuit |
Maximum inrush current |
10 amps up to 10mS |
Block output current |
15 amps at 35C |
Output OFF leakage current |
1.0 mA |
Maximumswitching frequency |
Once per second (high inrush current) |
Output turn–on delay (maximum) |
1mS |
Output voltage drop |
2.0 volts maximum at 2 amps inrush |
Minimum Recommended Load |
50 mA with No Load nabled |
Output Diagnostics |
Short Circuit, Overload, No Load, Failed Switch, Overtemperature |
Environmental: Operating temperature |
0 to +60C (32 to +140F) |
Storage temperature |
–40 to +100C (–40 to +212F) |
Humidity |
5 to 95% (non–condensing) |
Vibration |
5–10Hz 0.2” (5.08mm) displacement, 10–200Hz at 1G |
Troubleshooting IC660BBD023
Troubleshooting information is available on IC660BBD023's website page; it also includes a datasheet, a user manual, and a wiring diagram.
Repair your IC660BBD023
PDF Supply can repair your IC660BBD023 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
For more information on the IC660BBD023 Sink In/Out Block of the GE Fanuc Genius I/O Series, please see the Datasheet User-Manual.
The final letter in the part number (ex. IC660BBD023K) indicates the revision. Revision K and later use the newer style electronic housing and therefore need the newer style plastic door and may indicate some compatibility issues with the terminal strip.
Common related search terms: Configuration, Datasheet, Emerson, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.