GE / IP FANUC Series 90/30 In Stock
The IC660BBD023 is a 24 VDC Source I/O, 16 Circuit, 2/3 Wire Sensor Compatible Block of GE Fanuc series 90-30 PLCs. It is one of the discrete and analog blocks in this series. Its interface is electromechanical and has two or three wire solid state sensors. The block has 16 discrete circuits that can work as inputs, tristate inputs, or outputs. This block receives current from field output devices. The power source needed is 24/48 VDC. The IC660BBD023 has 16 circuits and many features. These include output pulse test, configurable input filter time, output power up defaults, and output hold last state or default. It also has diagnostics for installation and run-time errors.
Dimensions for IC660BBD023 are 22.4c.m. x 9.05cm x 11.23c.m. The block weighs 1.8kg. Its operating temperatures are from 0 to 60 degrees Celsius. A handheld monitor and CPU rev 110 or later is required for proper configurations. This block is compatible with all types of handheld monitors. The IC660BBD023 can replace all its previous versions when a compatible electronics assembly is. When installing, a protective case should be used in conjunction with an appropriate environment, meaning no airborne contaminants and adequate cooling and air flow. A reliable grounding system is also required. The desired cables when wiring the terminals are #12 or two #14 wires.
|Rated Voltage:||24 VDC|
|# of Points:||16|
|Input Range:||18-30 VDC|
|Load Current:||2 Amp|
|Operating Voltage:||18-30 VDC|
|Points per Common:||One group of 16|
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.