GE / IP FANUC Series 90/30 In Stock
Other Available Revisions for the IC660BBD100 IC660BBD100/AIC660BBD100/BIC660BBD100/CAIC660BBD100/KIC660BBD100/RR
The IC660BBD100 is a 115 VAC 8-Circuit Grouped I/O block from the GE Automation Intelligent Platform Series manufactured by GE Fanuc. The IC660BBD100 contains eight independent discrete circuits assembled in a single group with an operations rating of 115 volts AC. Each independent circuit is capable of functioning as an input, tri-state input, or output. A separate power supply is not required for this block as the power controller tapers off from the input/output device voltages wired to the terminals of the IC660BBD100 block.
The dimensions are 8.83” (22.44cm) x 3.5” (8.89cm) x 3.94” (10.00cm) with a weight of 4lbs. (1.8kg).
Rated Voltage: | 115 volt AC |
# of Points: | 8 |
Input Range: | 93-132 VAC |
Load Current: | 2 Amps |
Operating Voltage: | 93-132 VAC |
Points per Common: | One group of 8 |
Blocktype: CatalogNumbers: Block: TerminalAssemblyonly: ElectronicsAssemblyonly: |
8 circuit combination input and output
IC660BBD100 IC660TSD100 IC660EBD101 |
Size (height x width x depth): Weight: LED’s (I/O block): LED’s (each circuit): Block to Block Isolation: HeatDissipation: |
8.83” (22.44cm) x 3.50” (8.89cm) x 3.94” (10.00cm) 4 lbs. (1.8 kg) UnitOK,I / OEnabled On logic side of switch 1500 V 16W maximum with 8 inputs 43.5W maximum with 8 outputs on at 2 amps. |
Standbypower (all inputs and outputs off): Operatingvoltage(singlesource): Frequency: Power supplydropouttime: |
8.5 Watts 93–132 VAC 47–63 Hz 1 cycle (16.7mS at 60Hz, 20mS at 50Hz) |
InputCharacteristics: Non–tristate input, OFF state: Minimum voltage across input device (IN to H) Maximum leakage through input device Non–tristate input, ON state: Maximum voltage across input device (IN to H) Maximum switch current threshold Tristate input, OFF state: Acceptable voltage across input device (IN to H) Tristate input, ON state: Maximum voltage across input device (IN to H) Input load network: Resistor to N Capacitor to H Input processing time (typical) Selectable input filter times Inputdiagnostics |
60 VRMS |
1.5 mA |
|
20 VRMS |
|
6 mA RMS |
|
16 VRMS–40 VRMS |
|
4 VRMS |
|
13K ohms |
|
.10 ïf |
|
2mS + filter |
|
10 to 100mS in 10mS increments |
|
Open Wire, Overtemperature, Failed Switch |
|
OutputCharacteristics: Circuit output current (steady state) Maximum inrush current up to 2 cycles Maximum inrush current 2–6 cycles Maximum block output current Output Leakage @ 115 VAC: Current at 0 volt output (OUT to N) Voltage at open output (OUT to N) Output switch (OFF to ON / ON to OFF) Maximumswitching frequency Turn–on delay (maximum) Voltage drop (at 2 amps) Voltage drop (at 30 amps inrush) Recommended min. load, resistive (No Load disabled): Recommended min. load, inductive (No Load dis- abled): No Load enabled threshold Fusing Outputdiagnostics |
2 amps RMS |
25 amps peak |
|
14 amps peak |
|
15 amps at 35C, 7.5 amps at 60C |
|
< 7mA |
|
65 volts |
|
Zerocrossing |
|
Once per second (high inrush currents) |
|
0.5 Hz + 1mS |
|
2.5 volts |
|
10 volts |
|
25mA |
|
40mA |
|
50mA |
|
Internal electronic short circuit trip. 100ms long time trip |
|
Short Circuit, Overload, No Load, Failed Switch, Overtemperature |
|
Environmental: Operating Temperature Storage Temperature Humidity Vibration |
0 to +60 C (32 to +140 F) |
–40 to +100 C (–40 to +212 F) |
|
5% to 95% (non–condensing) |
|
5–10 Hz 0.2” (5.08mm) displacement, 10–200 Hz at 1G |
Troubleshooting IC660BBD100
Troubleshooting information is available on IC660BBD100's website page; it also includes a datasheet, a user manual, and a wiring diagram.
Repair your IC660BBD100
PDF Supply can repair your IC660BBD100 in 3-5 business days. And PDF Supply stands by all of its repairs with a 1 year customer satisfaction warranty.
For more information on the IC660BBD100 8-Circuit Grouped I/O Block of the GE Fanuc Genius I/O Series, please see the Datasheet User-Manual.
IC660BBD100 is a Phase B GE Genius block and is compatible with all GENIUS supported PLC systems. The earlier version- IC660CBD100 is a Phase A GE Genius Block and is only compatible with Series Six and Series Five PLCs.
The final letter in the part number (ex. IC660BBD100K) indicates the revision. Revision K and later use the newer style electronic housing and therefore need the newer style plastic door and may indicate some compatibility issues with the terminal strip.
Common related search terms: ConfigurationDatasheet, Emerson, Manual, PDF, PLC, Price, Repair, Specification, Troubleshoot, User-Manual, Wiring,
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.