GE / IP FANUC Series 90/30 In Stock
The IC660BBD100 is a 115 VAC 8-Circuit Grouped I/O block from the GE Automation Intelligent Platform Series manufactured by GE Fanuc. The IC660BBD100 contains eight independent discrete circuits assembled in a single group with an operations rating of 115 volts AC. Each independent circuit is capable of functioning as an input, tri-state input, or output. A separate power supply is not required for this block as the power controller tapers off from the input/output device voltages wired to the terminals of the IC660BBD100 block.
The dimensions are 8.83” (22.44cm) x 3.5” (8.89cm) x 3.94” (10.00cm) with a weight of 4lbs. (1.8kg). If a CPU, bus interface, or network cable experiences a communication failure, the Genius blocks are designed to be the reliable operations system hosted over a network – the Genius LAN. This network allows the blocks to communicate with the system CPU. If two or more CPUs are operating concurrently in a redundant configuration, the Genius blocks will automatically switch to a backup CPU if there is a communication failure with the main controller.
Considered "open equipment," Genius I/O blocks must be installed within a protective housing and should be located in an area with suitable cooling airflow that is airborne contaminant free. A temperature of zero to +60 C (32 to +140 F) is required for operation, and a temperature of -40 to +100 C (-40 to 212 F) is required for storage. Humidity should not be lower than 5% or exceed 95% (non-condensing). It is not necessary to remove field wiring or reconfigure the block when replacing the block’s electronics assembly with a compatible model. The IC660CBD100 is backward compatible with the IC660BBD100 and can be used as an alternative or replacement.
|Rated Voltage:||115 volt AC|
|# of Points:||8|
|Input Range:||93-132 VAC|
|Load Current:||2 Amps|
|Operating Voltage:||93-132 VAC|
|Points per Common:||One group of 8|
PDF Electric & Supply Inc. sells new, new surplus and refurbished products which are sourced through independent channels. All warranties and support, if applicable, are with PDF Electric & Supply Inc. and not the manufacturer. PDF Electric & Supply Inc. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturer on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.