1-919-535-3180 | 1-800-360-6802
sales@pdfsupply.com

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i

1-919-535-3180

1-800-360-6802

Mon-Fri 8AM-5PM EST

sales@pdfsupply.com

IC660BLM506

Rated 4.3/5 Based on 7 ratings.

Rate your purchase of the IC660BLM506
Loading...
disclaimer

MSRP $216

Preowned
PDF Supply Company, LLC is not an authorized distributor for GE Fanuc Emerson

New

  ON SALE ! 
$455

3 In Stock

✓  2 Year PDF Supply Warranty

*Need a Specific Revision?

GE Bus Terminator 150 Ohm (Qty 4)

Technical Information

The IC660BLM506 terminating plug is a Genius I/O bus terminator with a 150-ohm capacity.  It is equipped with 4 connection points. The IC660BLM506 terminating plug is used in the Genius I/O system. It is compatible with both Serial 1 and Serial 2 terminals. It is compatible with conventional bus cables and cables with premolded connectors. The IC660BLM506 terminating plug is a prefabricated connector that is usually connected with the female end of a connector cable. The terminating plug weighs around 2 pounds. The Genius I/O block is self-contained, configurable, and easy to install. The block is an intelligent device that can be operated both as an input or an output device. The front of the block comes with isolated circuits which each have their own LED indicators. The operating frequency is 50/60 Hertz. 


 

The IC660BLM506 terminating plug is not water resistant and it should be protected from water splashes. The terminating plug is also affected by EMC noise. The Genius I/O block that hosts it consists of a terminal assembly and an electronics assembly. The terminal assembly is used as the main base for the I/O block. It can be keyed mechanically and electrically and it can accept different current and voltage levels and different wiring configurations. The 150-ohm IC660BLM506 terminating plug uses capacitor termination to reduce the common noise that might occur from high frequency pickups and loop currents. It uses cable shields that are designed for low frequencies. The connector of the terminator is made up of high quality material and it is built strong.

 The final letter in the part number (ex. IC660BLM506K) indicates the revision. Revision K or later use the newer style electronic housing and therefore needs the newer style plastic door and may indicate some compatibility issues with the terminal strip.

 

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

Common related search terms: Emerson

All online orders placed before 4:30 PM EST “SHIPS SAME DAY FREE!" World’s largest warehouse of Factory Sealed GE 90-30 PLC, GENIUS I/O and RX7i PACSystem.highlight_off

PDF Supply Company, LLC. sells surplus and refurbished products, which are sourced through independent channels. All warranties and support, if applicable, are with PDF Supply Company, LLC. and not the manufacturer; manufacturer warranties do not apply. PDF Supply Company, LLC. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturers on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. PDF Supply Company, LLC. does not sell or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.