1-919-535-3180 | 1-800-360-6802

GE / IP FANUC Series 90/30 In Stock

World's Largest Warehouse

of GE 90-30, Genius, and RX7i



Mon-Fri 8AM-5PM EST



Rated 4.7/5 Based on 13 ratings.

Rate your purchase of the IC660BPM500

SKU 2173254  UPC 0788784210739


MSRP $764

PDF Supply Company, LLC is not an authorized distributor for GE Fanuc Emerson

Repair Service


Save $476

5-10 Days

✓  2 Year PDF Supply Warranty

*What is Fast Repair?

Product Description

IC660BPM500 is a 4 lb. Genius I/O Handheld Monitor Battery Pack for use with handheld monitor (HHM) model IC660HHM501. A battery pack should always be installed to operate the HHM, even if AC power is being used. IC660BPM500 provides up to six hours of operation when fully charged. To maximize lifespan, the battery should be allowed to discharge fully between charges and/or at least once a month. If battery power is too low, a “LOW BATTERY, HHM HALTED, Please recharge” message may appear. The display may also simply remain blank, or two lines may briefly appear. Current operation could be suspended if power is too low.

Upon delivery, the battery pack will not be charged. Before powering a HHM for the first time, the batter pack will need to charge via the adapter for 24 hours. Subsequent recharging time is only 16 hours. It is recommended to have a spare battery pack, so the user can alternate packs while charging. If a batter pack will not charge, it is likely a faulty pack, not the HHM.

When utilizing AC power to operate the HHM, the battery pack must charge for at least 20 minutes (if it is new or fully discharged). Temporary operation may be necessary before charging is complete and will require the user to plug the adapter cable into the HHM, wait 15 seconds, and then power up the HHM. The battery pack might also require removal and reinstallation for proper performance.  The IC660BPM500 battery pack may begin to deteriorate if the user continually uses the HHM in AC mode for extended periods. After two years of AC operation, the battery pack may resist charge resulting in the inability to work independently.

 The final letter in the part number (ex. IC660BPM500K) indicates the revision. Revision K or later use the newer style electronic housing and therefore needs the newer style plastic door and may indicate some compatibility issues with the terminal strip.

ST. LOUIS, Feb. 1, 2019 – Emerson today announced it has completed the purchase of Intelligent Platforms from General Electric.

Common related search terms: BatteryDatasheetEmersonManualPDFPLCPriceRepairSpecificationTroubleshootUser-ManualWiring

All online orders placed before 4:30 PM EST “SHIPS SAME DAY FREE!" World’s largest warehouse of Factory Sealed GE 90-30 PLC, GENIUS I/O and RX7i PACSystem.highlight_off

PDF Supply Company, LLC. sells surplus and refurbished products, which are sourced through independent channels. All warranties and support, if applicable, are with PDF Supply Company, LLC. and not the manufacturer; manufacturer warranties do not apply. PDF Supply Company, LLC. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturers on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. PDF Supply Company, LLC. does not sell or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.