GE / IP FANUC Series 90/30 In Stock
PDF Supply Company, LLC is not an authorized distributor for GE Fanuc Emerson
Other Available Revisions for the IC660CBB903 IC660CBB903AIC660CBB903BIC660CBB903CIC660CBB903-CAIC660CBB903DIC660CBB903EIC660CBB903FIC660CBB903HIC660CBB903KIC660CBB903LIC660CBB903MIC660CBB903NIC660CBB903PIC660CBB903QIC660CBB903RIC660CBB903-RRIC660CBB903SIC660CBB903TIC660CBB903UIC660CBB903VIC660CBB903WIC660CBB903XIC660CBB903YIC660CBB903Z
Series Six Genius Block Bus Controller GE Fanuc Series 6 Genius Block IC660C IC660CB IC660CBB
The GE Fanuc IC660CBB903 Series Six PLC Bus controller (without diagnostics) is a Phase B bus controller for the Series Six PLC system. This bus controller interfaces the Series Six PLCs with the Genius I/O Serial bus. Unlike the diagnostic models, the IC660CBB903 controller does not come with the built-in diagnostic features but it relies on the handheld monitor to send out a diagnostic report from the block when necessary. The IC660CBB903 controller belongs to the Phase B enhanced bus controller series which supports bus applications with baud rates other than the standard 153.6 Kilo-baud rate. The IC660CBB903 controller also supports bus applications that include an RTD block or any Genius I/O block with more than 64 I/O bits. The IC660CBB903 controller is compatible with the Phase A bus controllers and it can be used to replace the Phase A controllers.
The IC660CBB903 controller is a rack-mounted enhanced Series Six PLC module. It can also be installed on either a CPU rack or a high-density remote I/O rack. The IC660CBB903 controller has a front-panel handheld monitor port which provides access to all the field devices on the bus excep thet I/O block configuration. Bus and block operations can be monitored, diagnostic messages can be displayed, and fault messages can be cleared from a convenient central location by using the handheld monitor. The IC660CBB903 controller also has I/O bus wiring terminals on the front for Serial bus and shield wiring connections. It has 2 front-panel LEDs that are the “BOARD OK” and “COMM OK” LEDs that show the bus controller’s status updates. The IC660CBB903 controller supports programmed communication between 2 CPU modules, and it also supports redundant bus communication.
IC660CBB903 is a Phase B GE Genius block and is compatible with all GENIUS supported PLC systems. The earlier version- IC660CBB901 is a Phase A GE Genius Block and is only compatible with Series Six and Series Five PLCs.
The final letter in the part number (ex. IC660CBB903K) indicates the revision. Revision K or later use the newer style electronic housing and therefore needs the newer style plastic door and may indicate some compatibility issues with the terminal strip.
PDF Supply Company, LLC. sells surplus and refurbished products, which are sourced through independent channels. All warranties and support, if applicable, are with PDF Supply Company, LLC. and not the manufacturer; manufacturer warranties do not apply. PDF Supply Company, LLC. is not an authorized distributor or representative for the listed manufacturers and makes no representations as to any quality control performed by any listed manufacturers on the products. The products listed on this website may vary as to their country of origin; the accessories, and other items included with the product; and the language used on the packaging, the parts, and any related instructions or printed material related to the products. PDF Supply Company, LLC. does not sell or license software that may be needed to operate certain hardware and customers must obtain any necessary software licensing, maintenance, or upgrades from the manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or other authorized source. This website is not sanctioned or approved by any manufacturer or tradename listed. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.